VIXEN GO VGD5050-4K Sound Deadener for Cars 80 Mil Installation Guide
- June 1, 2024
- VIXEN GO
Table of Contents
VIXEN GO VGD5050-4K Sound Deadener for Cars 80 Mil
Product Specifications
- Model: VGD5050-4K
- Sound Deadening Material Size: 19.7 x 19.7 inches (10.8 sq. ft)
- Number of Sheets: 4
- Sound Deadening Roller Quantity: 2
- Sound Deadening Roller Size: 1-3/16 inches
Product Usage Instructions
Safety Instructions
- Always use safety precautions when working with sharp tools like scissors or knives.
- Wear cut-resistant gloves to protect your hands.
- Refer to your vehicle’s workshop manual for detailed instructions on disassembling parts like door panels.
Installation
- Prepare the surface: Clean and degrease the surface where the sound-deadening material will be applied using a quick-drying residue-free solvent.
- Cut the material: Use scissors or a sharp knife to cut the material to the desired size. A template can help achieve a perfect fit.
- Apply the material: Remove the adhesive paper from the back of the material and apply it to the prepared surface. Flatten with hands to remove air pockets.
- Use rollers: Use the included Sound Deadening Rollers for lasting adhesion and maximum damping effect. Work out any remaining air pockets with the roller.
BEFORE BEGINNING YOUR INSTALLATION
Read through the entire instruction guide before getting started with the installation. Professional installation is recommended for this product.
CONTENTS
- Sound Deadening Material 19.7″ x 19.7″ (10.8 sq. ft) 4 Sheets
- 1-3/16″ Sound Deadening Roller
- 2″ Sound Deadening Roller
If you are unsure about your installation abilities, have a professional installer install for you. Make sure the installation does not interfere with the normal operation of other parts of your vehicle.
SAFETY INSTRUCTIONS
- Use safety precautions while working with scissors or sharp knives.
- Use cut-resistant gloves.
- Refer to your vehicle’s workshop manual for detailed information on how to disassemble parts in your vehicle such as door panels etc.
INSTALLATION
- Prepare the surface where the sound-deadening material will be applied. A quick-drying residue-free solvent can be used to clean and degrease. The removal of dirt, grease, oil, wax, moisture, and rust will ensure a permanent bond between the material and the mounting surface.
- Using scissors or a sharp knife cut the material to the desired size. A cardboard or paper template may be useful to achieve the perfect fit.
- Wearing gloves, remove the adhesive paper from the back of the material and apply to the prepared surface. Flatten with hands as much as possible to remove air pockets.
- Using the included Vixen Go rollers will ensure lasting adhesion and maximum damping effect. Make a small hole with the sharp knife in the remaining air pockets and work the air out with the roller.
Frequently Asked Questions
- Q: Is professional installation recommended for this product?
- A: Yes, professional installation is recommended for optimal results and to ensure proper application.
- Q: What safety precautions should I take during installation?
- A: Use cut-resistant gloves, be cautious with sharp tools, and refer to your vehicle’s manual for guidance on disassembly.
- Q: How can I remove air pockets effectively?
- A: Make small holes in the remaining air pockets with a sharp knife and use the roller to work out the air.
Read User Manual Online (PDF format)
Loading......