VIXEN GO VGD5080-5K Sound Deadener for Cars 80 Mil Installation Guide

June 1, 2024
VIXEN GO

VIXEN GO VGD5080-5K Sound Deadener for Cars 80 Mil

VIXEN-GO-VGD5080-5K-Sound-Deadener-for-Cars-80-Mil-
product

Specifications

  • Model: VGD5080-5K
  • Sound Deadening Material Size: 19.7 x 31.5 inches (21.6 sq. ft)
  • Includes: 5 Sheets of Sound Deadening Material, 1-3/16 Sound Deadening Roller, 2 Sound Deadening Rollers

FAQ

  • Q: Can I install the sound deadening material myself?
    • A: While professional installation is recommended, you can install it yourself following the provided instructions. Ensure to follow safety precautions and proper installation steps.
  • Q: How do I know if the material is properly applied?
    • A: Ensure there are no air pockets trapped under the material by flattening it with hands and using the rollers. Proper adhesion will provide maximum damping effect.

BEFORE BEGINNING YOUR INSTALLATION

  • Read through the entire instruction guide before getting started with the installation.
  • Professional installation is recommended for this product.

CONTENTS

  • Sound Deadening Material 19.7″ x 31.5″ (21.6 sq. ft) 5 Sheets
  • 1-3/16″ Sound Deadening Roller
  • 2″ Sound Deadening Roller

If you are unsure about your installation abilities, have a professional installer perform the installation for you. Make sure the installation does not interfere with normal operation of other parts of your vehicle.

SAFETY INSTRUCTIONS

  • Use safety precautions while working with scissors or sharp knives.
  • Use cut resistant gloves.
  • Refer to your vehicle’s workshop manual for detailed information on how to disassemble parts in your vehicle such as door panels etc.

INSTALLATION

  • Prepare the surface where the sound deadening material will be applied. A quick-drying residue free solvent can be used to clean and degrease. The removal of dirt, grease, oil, wax, moisture and rust will ensure a permanent bond between the material and mounting surface.
  • Using scissors or a sharp knife cut the material to the desired size. A cardboard or paper template may be useful to achieve the perfect fit.
  • Wearing gloves, remove the adhesive paper from the back of the material and apply to the prepared surface. Flatten with hands as much as possible to remove air pockets.
  • Using the included Vixen Go rollers will ensure lasting adhesion and maximum damping effect. Make a small hole with the sharp knife on remaining air pockets and work the air out with the roller.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VIXEN GO User Manuals

Related Manuals