VIXEN Go VGD5050-4 Sound Deadener For Cars 80 mil Instructions

June 1, 2024
VIXEN GO

VGD5050-4
INSTALLATION INSTRUCTIONS

BEFORE BEGINNING YOUR INSTALLATION

Read through the entire instruction guide before getting started with the installation. Professional installation is recommended for this product.

VIXEN Go VGD5050 4 Sound Deadener For Cars 80 mil

CONTENTS

  • Sound Deadening Material 19.7″ x 19.7″ (10.8 sq. ft) 4 Sheets

If you are unsure about your installation abilities, have a professional installer perform the installation for you. Make sure the installation does not interfere with normal operation of other parts of your vehicle.

SAFETY INSTRUCTIONS

  • Use safety precautions while working with scissors or sharp knives.
  • Use cut resistant gloves.
  • Refer to your vehicle’s workshop manual for detailed information on how to disassemble parts in your vehicle such as door panels etc.

INSTALLATION

  • Prepare the surface where the sound deadening material will be applied. A quick-drying residue free solvent can be used to clean and degrease. The removal of dirt, grease, oil, wax, moisture and rust will ensure a permanent bond between the material and mounting surface.
  • Using scissors or a sharp knife cut the material to the desired size. A cardboard or paper template may be useful to achieve the perfect fit.
  • Wearing gloves, remove the adhesive paper from the back of the material and apply to the prepared surface. Flatten with hands as much as possible to remove air pockets.
  • Using a Vixen Go roller (sold separately) will ensure lasting adhesion and maximum damping effect. Make a small hole with the sharp knife on remaining air pockets and work the air out with the roller.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VIXEN GO User Manuals

Related Manuals