VIXEN Go VGD5080-10 Sound Deadener for Cars 80 mil Instructions
- June 1, 2024
- VIXEN GO
Table of Contents
VGD5080-10
INSTALLATION INSTRUCTIONS
BEFORE BEGINNING YOUR INSTALLATION
Read through the entire instruction guide before getting started with the installation. Professional installation is recommended for this product.
CONTENTS
- Sound Deadening Material 19.7″ x 31.5″ (43.1 sq. ft) 10 Sheets
If you are unsure about your installation abilities, have a professional installer perform the installation for you. Make sure the installation does not interfere with normal operation of other parts of your vehicle.
SAFETY INSTRUCTIONS
- Use safety precautions while working with scissors or sharp knives.
- Use cut resistant gloves.
- Refer to your vehicle’s workshop manual for detailed information on how to disassemble parts in your vehicle such as door panels etc.
INSTALLATION
- Prepare the surface where the sound deadening material will be applied. A quick-drying residue free solvent can be used to clean and degrease. The removal of dirt, grease, oil, wax, moisture and rust will ensure a permanent bond between the material and mounting surface.
- Using scissors or a sharp knife cut the material to the desired size. A cardboard or paper template may be useful to achieve the perfect fit.
- Wearing gloves, remove the adhesive paper from the back of the material and apply to the prepared surface. Flatten with hands as much as possible to remove air pockets.
- Using a Vixen Go roller (sold separately) will ensure lasting adhesion and maximum damping effect. Make a small hole with the sharp knife on remaining air pockets and work the air out with the roller.
Read User Manual Online (PDF format)
Loading......