BEGA 85111 Compact Downlight with Minimal Diffuse Light Percentage Instruction Manual
- June 1, 2024
- BEGA
Table of Contents
BEGA 85111 Compact Downlight with Minimal Diffuse Light Percentage
Specifications
- Module connected wattage: 18.3 W
- Luminaire connected wattage: 20.5 W
- Rated temperature: 25-35°C
- Ambient temperature: max 35°C
- Colour temperature: 3000 K (LED-1254/930) and 4000 K (LED-1254/940)
- Colour rendering index (CRI ): > 90
- Module luminous flux: 2190 lm (3000 K) and 2375 lm (4000 K)
- Luminaire luminous flux: 1098 lm (3000 K) and 1190 lm (4000 K)
- Luminaire luminous efficiency: 53.6 lm/W (3000 K) and 58 lm/W (4000 K)
DIMENSION
Instructions for use
Application
Compact floodlights with G½ connecting thread.
The floodlight can be screwed on by the customer with any G½ female thread
according to ISO 228 or with BEGA accessories.
BEGA Ultradark Optics® offers maximum illumination and eye comfort due to a
minimized diffuse light percentage and highly efficient glare suppression.
Product Description
- Luminaire made of aluminum alloy, aluminum, and stainless steel
- BEGA Unidure® coating technology
- Color graphite or silver
- Matt safety glass
- Internal louvers and polymer lens
- BEGA Ultradark Optics®
- Louvers and the interior surface of the anti-glare ring with maximum light-absorbing ultra-black nano-coating
- The rotation range of floodlight is 350°
- Swivel range -15°/+130°
- Mounting bracket with G½ threaded connection
- Thread length: 11 mm
- Connecting cable X05BQ-F 5 G 1 mm²
- Cable length 1 m
- BEGA Ultimate Driver®
- Complies with flicker requirements by IEEE 1789,
- DIN IEC/TR 63158, DIN IEC/TR 61547-1
- LED power supply unit
- 220-240 V 0/50-60 Hz
- DC 176-264 V
- DALI-controllable
- Number of DALI addresses: 1
- Basic insulation is provided between the mains and control cables
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
- Safety class I
- Protection class IP 65
- Dust-tight and protection against water jets Impact strength IK08
- Protection against mechanical
- impacts < 5 joule
- CE – Conformity mark
- Wind catching area: 0.02 m²
- Weight: 2.0 kg
- This product contains light sources of energy efficiency class(es) E, F
Safety
- The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547.
- To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at: www.bega.com.
Please note:
Contact with the inner surface of the luminaire reflector should be avoided to
permanently protect the special stray light-minimizing properties of the nano-
coating.
Installation
- Screw the floodlight G½ threaded connection firmly into the on-site G½ female thread or BEGA accessory.
- G½ threaded connection torque = 40 Nm. Secure the screw connection from loosening on site (if provided with locking screw S, see fig. A).
- Check the earth conductor connection between the G½ threaded connection and the on-site G½ female thread.
Adjust floodlight:
Undo the hexagon socket screw (wrench size 5 mm) and hexagon nut (wrench size
30 mm) and set the desired beam direction.
Torque:
- Hexagon socket screw = 7 Nm
- Hexagon nut = 35 Nm
Secure bolted connection Gß against loosening by tightening the hexagon socket screw (wrench size 2 mm) (see sketch B, C).
The electrical connection must be carried out with matching protection class
and safety class, strain-relieved, with suitable connection terminals (not
included in the scope of delivery) at the luminaire power supply cable.
Note the correct configuration of the main supply cable.
Make mains supply connections at the brown (L), blue (N), and green-yellow
lead ( ).
The connection of the control cables is achieved using both leads marked with
DALI.
In case these leads are not used the luminaire will be operated at full light
output.
Cleaning Maintenance
- Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
- Do not use high-pressure cleaners.
Specification
Lamp
- Module connected wattage 18.3 W
- Luminaire connected wattage 20.5 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 35 °C
85 111 K3
- Module designation LED-1254/930
- Color temperature 3000 K
- Color rendering index CRI > 90
- Module luminous flux 2190 lm
- Luminaire luminous flux 1098 lm
- Luminaire luminous efficiency 53,6 lm / W
85 111 K4
- Module designation LED-1254/940
- Color temperature 4000 K
- Color rendering index CRI > 90
- Module luminous flux 2375 lm
- Luminaire luminous flux 1190 lm
- Luminaire luminous efficiency 58 lm / W
Lighting technology
- Symmetrically focused broad spread light distribution with minimal diffuse light percentage.
- Half beam angle 56°
FAQ
- Q: Can I install the luminaire myself?
- A: No, installation and commissioning should only be carried out by a qualified electrician to ensure safety and proper functioning.
- Q: Where can I find additional protection components against overvoltage?
- A: Additional overvoltage protection components can be found on the manufacturer’s website at www.bega.com.