LEDWOOD LD-T06-TWS Bluetooth Stereo Headset User Manual

: October 27, 2023
: LEDWOOD

Table of Contents

TURN ON / OFF THE BLUETOOTH EARPHONE
TWS PAIRING ( CONNECT 2 EARPHONES TOGETHER)
PAIR BOTH EARPHONES WITH THE BLUETOOTH DEVICE
BUTTON FUNCTION
CHARGING INSTRUCTION
CARE AND MAINTENANCE
FAQ
EC DECLARATION OF CONFORMITY
Documents / Resources

capella

BLUETOOTH STEREO HEADSET
USER MANUAL

TURN ON / OFF THE BLUETOOTH EARPHONE

TURN ON
Method 1 Take the earphones out of the charging case, the earphones will turn on auto-matically.
Method 2 Long Press Multi-function button for 2s to turn on the earphones.
Note The earphones can not be turned on while charging.
TURN OFF
Method 1 Long press the Multi-Function button for 3s to turn off the earphones.
Method 2 Put the earphones into the charging case to turn them off.
Note If you do not pair it with any Bluetooth device after taking the earphones out of the charging case, it will turn off after about 5 minutes.

TWS PAIRING ( CONNECT 2 EARPHONES TOGETHER)

Take the earphones out of the charging case, both earphones will automatically pair with each other
Note If the earphones paired unsuccessfully, then restart the earphones, they will pair with each other automatically.

PAIR BOTH EARPHONES WITH THE BLUETOOTH DEVICE

Follow up above steps to turn on the earphones, activate Bluetooth on your mobile device, select the « CAPELLA « from the list of available Bluetooth devices.

BUTTON FUNCTION

PLAYING MUSIC
Previous Short press Multi-Function button of the left earphone 3 times.
Next Song Short press the Multi-Function button of the right earphone 3 times.
Vol – Short press Multi-Function button of the left earphone 2 times.
Vol + Short press Multi-Function button of the right earphone 2 times.
Play / Pause Short press the Multi-Function button of any earphone 1 time.

MAKE A CALL
Answer an incoming call Short press Multi-Function button one time
Reject an incoming call Hold and press the Multi-Function button for 2 seconds
End the call Short press the Multi-Function button one time

VOICE ASSISTANT
Activate the voice assistant
Short press the Multi-Function button of any earphones for 1.5s to activate the SIRI voice assistant function, only the IOS system is supported.
Close the voice assistant
Short press again the Multi-Function button of any earphones for 1.5s to close the SIRI voice assistant function, only the IOS system is supported.

CHARGING INSTRUCTION

Put the Bluetooth earphones into the charging case to begin to charge the earphones.

CARE AND MAINTENANCE

ATTENTION

Please kindly read this user manual before using the product carefully and keep it for future reference.
Please charging the product battery fully when first use.
If do not use the product exceed 2 weeks, please charge it.
Please only use the supplied cable to charging the product and certified adaptor.
If the earphone can not be paired with a mobile phone, please check first if the earphone was in Bluetooth mode; if the earphone unable paired with a mobile phone device, lease turn off the earphone first, then turn on and make sure it is in Bluetooth pairing mode; If the mobile phone didn’t respond, please reboot the mobile phone; If the earphone didn’t response, please reboot the earphone or recovery default setting.

CAUTION

Do not use the product at excessive volume levels or a long time, as hearing damage may occur.
Do not charge the earphone with a current exceed 2A, the battery might get damaged.

FAQ

Q: Why just only one working?

– A: Put the earbuds back in the charging case, then take them out to check if it is in stereo mode, if not please reset the earbuds to settle this problem.

Q: The mobile shows can not connect with the earbuds, how to settle?

– A: Deleting the pairing name on your mobile and research the pairing name again to connect.

Q: Why there is no voice with the music and phone call?

– A: For android mobile, there is an icon on the right of the pairing name, click it and cancel two audio items then select again.
For IOS mobile, find the setting general function, click it and you can see audio calling mode, select «automatic». If it is automatic itself, change into another option first, then select the automatic again. If it still has no voice, delete the pairing name research again to pairing.

Q: Why is the video/games delayed?

– A: Influenced by the environment, network, mobile edit code speed, will lead to audio data any transfer delays from mobile to earbuds.

EC DECLARATION OF CONFORMITY

Hereby, we :
PRIMETIME – Parc deactivate des Moulins de la Lys
Rue Fleur de Lin, Cellule 7 – 59116 HOUPLINES – FRANCE

Declare that below product(s) :
Product …………………………..Earphones Bluetooth
Model number …………………………….. LD-T06-TWS
Factory model number …………………………………….. T06
Commercial brand …………………………………….LEDWOOD
Complies (comply) to the essential provisions of the EC directive(s) :
LVD Directive ……………………………………………………..2014/35/EU
RED directive ………………………………………….2014/53/EU
ROHS directive …………………………………………………..2015/863/EU

The essential provisions of the following harmonized standards :
ETSI EN 300 328 V2.2.2 (2019-07)
ETSI EN 301 489-1 V2.2.3(2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
EN 50663 : 2017
EN 62368-1:2014+A11:2017
Date …………………..01 01 2021
Nom ……………………….WALLYN
Titre ……………………… GERANT

CONNECTED SOUND
LEDWOOD is a trademark owned by Primetime – Copyright 2020
All rights reserved Primetime 2020
Imported by Primetime
Moulins de la Lys business park – Fleur de Lin Street, Cell 7
59116 HOUPLINES – FRANCE
Made in the PRChttp://ledwood-audio.com/en/news-notice-en/
Download the instructions in .pdf format
You have trouble pairing the headphones,
contact us via the mail below:
sav@primetime-distribution.com

Documents / Resources

| LEDWOOD LD-T06-TWS Bluetooth Stereo Headset [pdf] User Manual
LD-T06-TWS Bluetooth Stereo Headset, LD-T06-TWS, Bluetooth Stereo Headset, Stereo Headset, Headset
---|---