BLUEDEE SK020 PC Sound Bar User Guide

SK020 PC Sound Bar

User Guide

PACKAGE CONTENTS

1. Sound Ba「(Model: SK020)
2. User Guide
3. Type-C Charging Cable
4. 3.Smm Audio Cable

PRODUCT DIAGRAM

Top View

Function socket

1. CD Power On/ Off
2. Play/ Pause
3. Previous Track/ Volume
4. Mode Setting
5. NeXT Track/ Volume +
6. Clock Setting
7. Light Setting
8. USB Port
9. TF Port
10. 3.5mm Audio Port
11. Charging Indicator
12. DV5VPowe

LED Display

1. Clock Display
2. USB Mode
3. Clock PM
4. Bluetooth Mode
5. TF Mode
6. Play/ Pause
7. AUX Mode
8. Clock AM

Basic parameters

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.

Warning

• Never place the Sound Bar near the heat sources.
• Only use this Sound Bar indoors.
• Never place this Sound Bar on other electrical equipment.
• Keep the product dean and dry. Do not dean the product with detergent containing alcohol, ammonia, benzene or abrasives.

Caution

• Do not expose this product to high temperatures.
• Store this productiifia dry place. Keep it away from humidity and corrosives.
• Do not immerse the Sound Berlingo water or expose them to humidity for along time.
• Avoid dropping.
• Close attention is needed when using near children
• Unauthorized disassembly of any parts of this product is forbidden.
• Always ask a professional technician or authorized personnel for repair.

BUTTON CONTROL

Bluetooth/USB/TF mode)
---|---|---
Light On / Off| | Press the light button for 3s
Set the Light Mode| | Press the light button to sequentially switch among the four light modes
Enter Clock Setting /Save Clock Settings and Exit| | Press the clock setting button for 3s
Adjust the Clock and Minutes after entering the clock setting| | Press the clock setting button to toggle between clock and Press the volume + and volume – to add and subtract  clock and minutes
Reset the Sound bar| | Press the volume + and volume – at the same time for 3s
Reboost the Sound Bar| | Press the power button until the sound bar shut down and reboots

CLEANINGAND MAINTENANCE

1. Clean the Sound Bar on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.

Note:

• Do not insert anything into the product.

WARRANTYAND SERVlCE

If any problems occur, please contact the Blueweed Customer Care Centre via the contact information listed in this User Guide.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fallowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation. Changes or mod fictions to this unit not expressly approved by the party responsible for compliance could vai the user’ s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radipteradi frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur:in  a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fallowing  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techn cian for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.

Manufacturer:
Shenzhen hanke Technology Co., Ltd
Address:
Meipeng SKY311, No.3 Hebei Industrial Zone, Zhongxing Road, Ma’antang Community,
Bantian Street Longing District, Shenzhen, Guangdong, China, 518000
E-mail: support@bluede-tech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>