GEYER ER120WM Smart Wi-Fi Rail Power Relay Meter Instruction Manual
- June 16, 2024
- GEYER
Table of Contents
GEYER ER120WM Smart Wi-Fi Rail Power Relay Meter
1. Download and Install the App on the Mobile
Connect your phone to local wifi, and use your smartphone to scan one of the QR codes below to download and install the App.
2. Register Account
Open the App, click on ‘Me’ and then select ‘Register’ to create a new account.
3. Set time program
After logging in, select a device, and set the time program according to your needs.
4. Manual operation
Manual control is available through the App by selecting the power button.
5. Countdown time
Set a countdown for the device to turn off automatically after the specified duration.
6. Astronomical function sunrise time
This function allows the device to turn on or off according to the local sunrise and sunset times.
7. Random Function
The random function enables the device to turn on and off at random times within a set period.
8. Master Function
Master control allows for control of multiple devices simultaneously.
9. Modify Device Icon
Users can personalize the device icon within the App.
10. Modify Device Name
Users can change the name of the device as displayed in the App.
11. Specification
Related Voltage | 100-240V AC/50-60Hz |
---|---|
Rated Current | 220V AC (2x5A/COSΦ=1) |
Contact Configuration | 1NO+1NC/SPDT(NO+NC) |
Wifi Frequency | 2.4Ghz |
Mounting | Din Rail 35mm |
Ambient Temperature range | -10°C – 60°C |
Anti-condensation | Can set 30NO/30FF programs per day or per week |
Countdown time | From 1 min to 23 hours 59 mins |
12. Connection Diagram
A diagram illustrating the proper wiring setup for the device.
13. Dimensions
Dimensions of the device are provided for installation reference.
14. Troubleshooting
Guidelines for troubleshooting common issues that may arise during the use of the device.
Contact Information
- Geyer Hellas S.A. Drosia Chalkis, Evia, GR 34000, Greece
- Tel: +30 22210 98711
- email: csc@geyer.gr
- Website: www.geyer.gr
FAQ
- How do I reset my device?
- Press and hold the button on the device for about 5 seconds until the green LED blinks fast to reset.
- Can I control the device if I am not at home?
- Yes, the device can be controlled via the mobile App as long as it is connected to Wifi.
- Is the device compatible with voice command services?
- The device’s compatibility with voice command services like Google Assistant or Amazon Alexa is not specified and would need to be checked in the product’s specifications or with customer support.
Operating Instructions
Download and Register Account
Download and Install App by Mobile
Connect your phone to local wifi first Use your phone to scan any one of the QR code below to Download and install the App
Register Account
Add New Device
Connect the products with the power100-250VAC, the details connection diagrams please find it in this Instruction Press and hold the button for about 5 seconds until the Green LED light blinks fast.
- After holding the switch for 5 seconds, if the LED light is red, press the switch again and you will see the green light blink
Count down time
Set time programs
Function
- Circulate Function
- Random Function
- Meter Function
The following are displayed in the App:
-
Daily Consumption (KWh)
-
Current(mA)
-
Power(W)
-
Voltage (V)
-
Total Consumption (KWh)
-
Monthly Consumption (KWh)
-
Astronomical Function set Sunrise time
-
Astronomical Function set Sunset time
Modify Device Icon
Modify Device Name
Share Device
Create Group
Specification
- Rated Voltage: 100-240 VAC 50-60Hz
- Rated Current: 20A 250VAC(COS¢=1)
- Contact configuration: 1NO(SPST-NO)
- WiFi Frequency: 2.4GHz
- Mounting: DIN Rail 35 mm(EN 60715)
- Ambient temperature range:
- – 10°C. .. +60°C
- Can set 30 ON/OFF programs per day or per week.
- Countdown time, from 1 Min to 23 hours 59 Mins.
- If the product is disconnected from the network, the timer retains all programs set up by the Mobile App and works according to the set programs.
- With the memory function, when the product contact is in the close state, after the power failure, and then call the product contacts still keep the close state.
- Also can be controlled by tact switch from terminal 3 and 4.
- Can be shared with 20 users by Mobile App. If load exceeds 22A, then the relay with automatically disconnect the load circuit
- With Bluetooth function, when the Wifi signal is disconnected for 5 minutes, you can use the App to control the load through Bluetooth.
Connection Diagrams
Dimensions
Geyer Hellas S.A. Drosia Chalkis, Evia, GR 34100, Greece
- Tel: +30 22210 98711
- email: cs@geyer.gr
- www.geyer.gr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>