Hinds Instruments GEN6 Birefringence Measurement System User Guide
- June 1, 2024
- Hinds Instruments
Table of Contents
Hinds Instruments GEN6 Birefringence Measurement System User Guide
Product Using Instruction
| REV. | DESCRIPTION | BY | DATE |
|---|---|---|---|
| 0 | INITIAL CONTROL | cmansfield | 10/15/2009 |
| 1 | ADDED TILT SHEET TO DRAWING. | Mansfield | 9/21/2011 |
FRONT LOADING POSITION:
TILTED LOADING POSITION: ANGLE IS VARIABLE
UNSPECIFIED LIMITS
DIMENSIONS ARE IN INCHES| DO NOT SCALE DRAWING| |
---|---|---|---
FRACTIONS ± 1/32DECIMALS .XX .010.XXX
±.005HOLE DIA’s .XX ± .010.XXXANGLES ± 0°
30’BENDS ± 2°PERPENDICULARITY .003/INC
HCONCENTRICITY .003 TIR| STRAIGHTNESS 8./OR FLATNESS:
.005/INCHTHREADS:EXTERNAL – CLASS 2A INTERNAL – CLASS 28UNMARKED ANGLES.BENDS
& INTERSECTIONS: 90°MACHINED SURFACES:63 OR BETTERREMOVE ALL BURRS _ &
_SHARPCORNERS
DATE PRINTED:
|
APPROVALS| DATE
DRAWNcmansfield| 3/10/11
CHECKED| |
|
MATERIAL| SIZED|
|
SAMPLES MUST BE APPROVED BY ENGINEERINGDEPARTMENT PRIOR TO STARTING
PRODUCTION| FINISH| SCALE|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>