REDRAGON Horus TKL Mechanical Gaming Keyboard Instruction Manual

REDRAGON Horus TKL Mechanical Gaming Keyboard

Dear user

Thank you for you choosing  Brand, to protect your rights and for better customer service, we ask that you note our warranty rules.

1. Within the guaranty period, the repair is guaranteed for failure due to electrical circuit problems. Man-made damages, such as disassembly, hard impacts, submersion into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquakes are not included.
2. Consumable parts (such as foot stick) and spare parts replacement are not included in our warranty.
3. Please fill out the warranty card. The warranty card is valid with the stamp of the retailer.
4. This warranty card will not be reissued if lost. Please keep it in a safe place.

Scroll button function

The scroll button is placed on the right corner of the keyboard for volume adjustment and keyboard backlight brightness adjustment function Backlight brightness adjustment Press the e key, it is light on White color, Scroll button can switch in different brightness levels.

Volume adjustment

• Press key e the key light’s OFF, scroll button can switch the volume level.

Multimedia function on F9-F12

• FN+9: Browser
• FN+ 1 O: Research
• FN+ 11: Calculator
• FN+ 12: E-mail

Shortcut key function

• Stop
• Previous track
• Next track
• Play / Pause

Macro recording function

There are 4 profile keys from Ml to M4, each profile can assign 4 macro keys from G1 to G4, a total of 16 groups of macro recordings.

1. Press FN+(F1-F4) key to set a profile group, the key lights ON.
2. Press the MR key (MR key lights ON), then press the G key (G1/G2/G3/G4), and the key lights ON.
3. Record the desired keys.
4. Press the MR key to complete the recording (MR key lights OFF). For example Ml—-1-MR —-1-Gl —-1-ABC—-1-MR

OS support

• Windows XPNista/Win 7/Win 8/Win 10/Mac OS

How to connect the keyboard with a computer Wired Connection

Slide the ON/OFF switch on the left side of the keyboard to OFF. Take out the USB A to USB Type C cable in the package and connect the keyboard with your computer, Press FN+S(USB) key, and the LED is marked with M twinkle 5 times indicating the connecting successful. The computer will recognize and configure the keyboard automatically. Once the keyboard is powered up, charging begins. The LED is marked with M lights on red. It will turn white when the keyboard is fully recharged.

4G Wireless Connection

1. Slide the ON/OFF switch on the left side of the keyboard to ON.
2. Press [FN]+[4] for about 3 seconds, the LED marked with M flashes quickly in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The computer will recognize and configure the keyboard automatically.
3. The indicator will flash red when the battery is low. Please recharge the keyboard in time by plugging the Type C cable into the computer or it will turn off automatically soon, Please note LED marked with M will be light on Red while charging, it turns to Green when charging completed( In 2.4g connecting mode}.

Bluetooth Connection

•  Slide the ON/OFF/BT switch on the left side of the keyboard to ON.

•  Press [Fn]+[l](or [2]/[3] for other Bluetooth devices), and the LED marked with M flashes in
  blue (or cyan/magenta for the others).

• Turn on Bluetooth and scan for available devices on your computer or smartphone. It will find the “BT3.0Keyboard or BTS.O KB” device. Select one of them to get connected with it automatically.

• The indicator will flash in red when the battery is low. Please recharge the keyboard in time by plugging the type C cable into the computer or it will turn off automatically soon, Please note LED marked with M will be light on Red while charging, it turns to cyan/magenta when charging completed( In Bluetooth connecting mode).

How to play Macro

1. Choose the profile group by pressing the M key from M 1 to M4.
2. Press the Macro key from G1 to G4.
For example M 1 – G1 (ABC)

How to delete Macro

1. Choose the profile group by pressing the M key from Ml to M4 (The key lights ON).
2. Press the MR key (MR key lights ON).
3. Double press G keys from G1 to G4 (The key lights OFF).
4. Press the MR key to save(MR key lights OFF).

How to recharge the keyboard

• Find the USB A to USB type C cable in the packaging, plug the keyboard and connect it with a computer for charging, the LED indicator(M) of the keyboard will turn to red.
• Remark: The LED indicator (Ml will turn red when the keyboard is out of battery.

FAQ

• If the keyboard doesn’t respond, please check if the keyboard’s USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
• If you spill liquid on the keyboard, please remove the keyboard’s USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp} to let the keyboard dry naturally before using it again.

Function Introduction

• With standard USB and 2.4G/BT connections, the keyboard can be used on computers without any software or driver installation.
• There are 20 backlight effects.
  • Commands of key combinations with [FN] key.
  • [FN]+[lns]: Change backlight mode. There are 20 backlight effects.
  • [FN]+[Del]: Change the backlight color.
  • [FN] + [-]: Slow down the running speed of the backlight.
  • [FN] + [-]: Add up the running speed of the backlight.
  • [FN]+[TAB]:Turn the backlight to white.
  • [FN] + [Win]: Disable or enable the [Win] key.
  • [FN] + [1 ]: Select Bluetooth device one (for Bluetooth connection).
  • [FN] + [2]: Select Bluetooth device two (for Bluetooth connection).
  • [FN] + [3]: Select Bluetooth device three (for Bluetooth connection).
  • [FN] + [4]: Change to 2.4G wireless connection. Press and hold the
  • [FN]+[4] for 3 seconds to pair the keyboard with its receiver.
  • [FN] + [SJ: Switch to Wired connection.
  • [FN] + [ESC]: Set the keyboard to the default setting.
  • [FN] +[W]: Swapping ASDW key to Arrow key

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
• This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>