Dongguan Moritake Industrial SY112 Portable Bluetooth Speaker User Guide

**Dongguan**

SY112
Portable Bluetooth Speaker
Operational guidelines

Basic parameters

Effective distance: 10m
Output power: 3Wx2
Charge voltage: DC 5V
Frequency response: 120Hz – 16KHz Signal-To-Noise ration SNR: 70db
Audio Input: Bluetooth, TF cards, LINE USB Speaker unit: 40

Product charcteristics

• Bluetooth speakerphone call
• Smart Voice Tips
• TF card, USB disk playback, support MP3 and other audio source formats
• Micro USB charging interface

Operational instructions

1. Switch on/off Boot: dial“ON” Shut down: a dial to“OFF”

2. Bluetooth connection
   a. Search by cell phone or another device after entering Bluetooth mode conduct “SY112” pairing connection,  if you need to enter a pairing code of “0000”. after the pairing is successful, enter Bluetooth playback mode.
   b. After the device pairing is successful, the next time it enters Bluetooth mode, it will automatically return to 10S, and the backlink timeout will enter the pairing state.

3. Bluetooth call
   When you receive a call, press key Answer, Long press refuse, Talking process short press hang up.

4. TF cards, USB disks
   Insert TF card into TF card slot to automatically switch to card reading mode.
   Inserting a USB socket automatically switches to card reading mode.

5. Audio Input
   Will be 3. one end of the 5mm stereo audio cable plug is connected to the Bluetooth speaker AUX port, and the other end is linked to the 3.5mm audio output of multimedia audio source playback devices such as mobile/MP3/PC. The Bluetooth speaker automatically switches to line mode.

6. Charging
   Connect micro charging cable USB plug to USB charging port with DC 5V, micro charging head is connected to the machine plugin, You can charge and charge the red indicator light.

Frequently Asked Problem Solutions

1. The device is often automatically turned off after a long period of playing.
   The battery may not have enough power. please charge and try again.

2. Bluetooth music appears, Caden.

3. Whether it is beyond the effective connection distance of the speaker, or if there is an obstacle between the speaker and the Bluetooth device.

4. Matching failed
   Check that the speaker is in search or reboot.
   There are too many Bluetooth devices around, making it difficult to search and turn off other Bluetooth devices.

Matters needing attention

1. Please store and use this product at room temperature;
2. Do not expose this product to rain or wet conditions;
3. Do not drop, to avoid the fall of the product damage;
4. Do not dismantle and repair the product;
5. The product built-in lithium battery, do not casually discard or put in the fire, so as not to cause danger!

Packing list

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a  Class  B digital device,  pursuant to  Part  15  of the  FCC  Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates uses and can radiate radio frequency energy and,  if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  If   this equipment  does  cause harmful  interference  to radio  or  television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐‐   Reorient or relocate the receiving antenna.
‐‐   Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐   Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following  two conditions:
(1) This device may not cause harmful interference, and
(2)  this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20 cm the radiator your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>