HOOKE ROAD BXG.2098-S Wrangler JK Tailgate Basket Rear Cargo Rack Installation Guide
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.2098-S Wrangler JK Tailgate Basket Rear Cargo Rack
Installation Guide
Product Installation Instruction
Cargo Rack| 
System Part (1)
System Part (2)|
System Part (3)
Reinforced Tailgate Hinges|
System Part (4)|
Spare Tire Reinforced Bracket
Qty| Part Name| Size(mm)| Qty
---|---|---|---
10| Hex Head Flange Bolts| M865|
2| Hex Head Flange Bolts| M825|
18| Button Head Socket Cap Bolts Screws| M616|
12| Flat Washer| M8252|
18| Flat Washer| M612*1.5|
18| Flange Hex Lock Nuts| M6|
Tools required:
a. Drive Socket Ratchet Wrench;
b. 10mm, 13mm Wrench;
c. 4mm Hex Bit Socket;
d. 10mm, 13mm Shallow Socket;
Installation time:
About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2098-S), please scan the QR code.
Installation instruction:
Step 1: First, remove the factory vehicle’s tailgate hinges and replace
them with our reinforced tailgate hinges. Secure them in place using the
factory vehicle screws and use M825 hex head flange bolts for the leftmost
hole. The middle screws do not need to be installed.
Step 2: Next, in the holes where no screws were installed in the previous
step, use M825 hex head flange bolts to install the system part (2) on the
reinforced tailgate hinges.
Step 3: Next, if you are installing a spare tire, assemble the spare tire
rein forced bracket and system part (3) with your factory vehicle spare tire
rack using M865 screws.
(8) M865 Hex Head Flange Bolts
(8) M8252 Flat Washer
Attention the location of the hole
Step 4: Next, assemble system part (4) using M6*16 screws and nuts.
Step 5: Next, assemble cargo rack using M616 screws and nuts.
(7) M616 Button Head Socket Cap Bolts Screws
(7) M6121.5 Flat Washer
(7) M6 Flange Hex Lock Nuts
Step 5: Finally, assemble system part (1) using M616 screws and nuts.
(8) M616 Button Head Socket Cap Bolts Screws
(8) M6121.5 Flat Washer
(8) M6 Flange Hex Lock Nuts
Step 6: The installation is complete. We hope you enjoy a wonderful off-
road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Google Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad
If You’d Like
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>