ULTIMEA U3300 2.2ch Sound Bars for TV 2 in 1 Separable Speakers User Guide

U3300 2.2ch Sound Bars for TV
2 in 1 Separable Speakers
Apollo S40
User Guide

ACCESSORIES LIST

BLUETOOTH

Bluetooth Connection

1. Turn on soundbar, press and hold “SOURCE” button for 3 seconds on soundbar or on remote control t o enter Bluetooth pairing mode.
2. Turn on Bluetooth setting of your phone and choose name of “ULTIMEA Apollo S40” to connect soundbar.

Note: If it’s already in the pairing mode, there’s no need to long hold the “SOURCE” button. Long-hold procedure is only needed to replace a device which is already connected to the soundbar.

CONNECTING TO TV

OPTION 1(Preferred): HDMI ARC
NOTE:

1. HDMI Connection is unavailable if your TV does not support HDMI ARC.
2. Connecting via HDMI(ARC) enable the following functions using the TV’s remote control:
   Turn the TV and soundbar on/off and adjust the volume simultaneously. (Support CEC function)

OPTION 2: OPTICAL
NOTE:

1. Make sure the TV’s port is OPTICAL OUT.
2. If the sound is coming from TV’s internal speaker, mute the TV speaker or volume is minimize.

OPTION 3: AUX
NOTE:

1. Use the 3.5mm to RCA audio cable to connect to your TV’s RCA AUDIO OUT port.
2. Make sure that the cable ends match the color of TV ports.

SOUNDBAR CONTROLS

Control Panel

1. VOL+: Volume Up.

2. VOL-: Volume Down.

3. SOURCE:
   Press to switch channel:
   ARC-BT-Optical-AUX-USB. Press for 3 seconds t o switch to BT mode, and enter pairing mode.

4. Power Button:
   Press t o power on/ Press for 3 seconds to power off.

5. : Power Button Press t o power on/ Press for 3 seconds to power off

6. “VOL+” : Volume up

7.  “ ”: Previous BT and USB mode: skip to previous track.

8. “VOL -“: Volume Down

9. “ “: music
   Press to switch to Music mode, the display will show: “ ”.

10. : NEWS/ NIGHT
    Press to switch News mode, the display will show: .
    Press and hold the button for 3 seconds to switch Night mode, the display will show: .

11. “BASS+”.
    Increase the Bass level, the display will show:

12. “BASS -”
    Decrease the Bass level, the display will show:

13. “ “: LED
    Press to turn off LED, press again to turn on.

14. “ ” : Mute/ Recover the volume

15. “ ”: Play/Pause
    BT and USB mode: Play/ Pause
    USB Mode: Hold for 3 seconds to switch between
    USB single loop play back and list loop playback.

16. “ ” : Next
    BT and USB mode: skip to next track.

17. “ ” :Movie
    Press t o switch t o Movie mode, the display will show: .

18. “SOURCE”:
    Press to switch channel: Hold for 3 seconds to switch to bluetooth pairing mode.

19. “ ” : Hi-Fi
    Hi-Fi Sound: Sound Clearer, the display will show “ ”.

20. “ ”: DYNAMIC
    Dynamic Sound: Sound more powerful, the display will show : “ ”.

Default Mode: News+Dynamic (You can keep the volume you had last time).

WALL MOUNT INSTALLATION

base](https://manuals.plus/wp-content/uploads/2023/03/ULTIMEA-U3300-2.2ch- Sound-Bars-for-TV-2-in-1-Separable-Speakers-stand-on-base.jpg)

Wall mounting:

NOTES FOR TV AUDIO SETTIMGS OF VARIOUS BRAND

Very Important!!!
How to Set up the Soundbar and TV? Normally as below: Settings → Sound → Digital Audio Output → PCM

More examples for various TV brands:
Samsung TV

• Settings > Sound > Sound output > select Receiver (HDMI)
• Settings > Sound > Expert Settings > Digital O u t p u t Audio Format > PCM
• Settings General > External Device Manager > Anynet + (HDM – CEC)> ON

Vizio TV

• Settings > Audio > TV Speakers > Off
• Settings > Audio > Digital Audio Out > PCM
• Settings > System > CEC > Enabled

Sony TV

• Settings > Display & Sounds > Audio Output > Speakers > Audio System
• Settings > Display & Sounds > Audio Output > Digital Audio Out > PCM
• Settings > Display & Sounds > Audio Output > Pass Through Mode > OFF
• Settings Channels & Inputs > External inputs >BRAVIA Sync > BRAVIA Sync control > ON

LGTV

• All Settings > General – Devices > HDMI Settings > SIMPLINK (HDMI – CEC)> ON
• All Settings > Sound > Advances Settings > Digital Sound Output > PCM
• All Settings > Sound > Sound Out > Use Wired Speaker > HDMI (ARC) Device

TCL ROKU TV

• Settings > Audio > Audio output > Auto
• Settings > Audio > Digital audio format > Select Stereo

Hisense ROKU TV

• Settings > Audio > TV Speakers > Select Disabled
• Settings > Audio > Digital Audio out > Select Stereo

CNN ROKU TV

• Settings > Audio > TV Speakers > Select Disabled
• Settings > Audio > Digital Audio Format > Select Stereo

Insignia Fire TV

• Settings Display & Sounds > Audio Output > TV Speakers > select OFF
• Settings Display& Sounds > Audio Output > Digital Audio Format > select PCM
• Settings Display & Sounds > HDMI CEC Device Control >ON

Toshiba Fire TV

• Settings > Display & Sounds > Audio Output > TV Speakers > select OFF
• Settings > Display & Sounds > Audio Output > Digital Audio Format > select PCM
• Settings > Display & Sounds > HDMI CEC Device Control > ON

Panasonic TV

• Menu Audio Settings > Advanced Audio > TV Speakers > select OFF
• Menu > Audio Settings > Advanced Audio > HDMI > select DIGITAL
• Menu > Audio Settings > Advanced Audio > Digital Audio Out > select PCM

Sharp TV (Powered by Android)

• settings > devices preferences > sound > Digital Output > select PCM
• settings > devices preferences > sound > Speakers > External audio system

Roku TV Stick

• Settings > Audio > Digital Output Format > Stereo
• Settings > Audio > Audio Mode > Select Stereo

Fire TV stick

• Settings > Display & Sounds > Audio > Surround Sound > PCM
• Settings > Display & Sounds > HDMI CEC Device Control > ON

Hisense ROKU TV

• Settings > Audio > TV Speakers > Select Disabled
• Settings > Audio > Digital Audio out > Select Stereo

ONN ROKU TV

• Settings > Audio > TV Speakers > Select Disabled
• Settings > Audio > Digital Audio Format > Select Stereo

TCL TV ( Powered by Android )

• TV Settings > Audio > Advanced Settings > Digital Audio Out > Select PCM
• TV Settings > System > T – Link > Select ON

Hisense TV ( Powered by Android )

• Settings > Sound > Speakers > select ARC
• Settings > Sound > Advanced Settings > Digital Audio Out > select PCM

Sharp TV

• Settings > sound > Advanced audio settings > TV Speaker & ARC > select ARC
• Settings > sound > Advanced audio settings > Digital Audio Out > select PCM

If you didn’t find your TV Brand or streaming devices here, please contact customer service of your TV or us at: Support@ultimea.com
WE ARE READY TO HELP

Support@ultimea.com

Prefer video tutorial?
Setup guidance video, or USER MANUAL on ULTIMEA website.

@Ultimea_Official

support.ultimea.com
gait 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
Mon-Fri 9am-5pm (CET)
+49 89-628-25828 (EU)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>