PYLE PLUTV46BTA 2-Way Waterproof Off Road Speakers User Manual
- June 20, 2024
- Pyle
Table of Contents
PyleUSA.com PLUTV46BTA
4’’ Waterproof Rated Off-Road Speakers
with Amplified Wireless BT Remote Control Receiver
Compact Dual Vehicle Speaker System for ATV,
UTV, 4×4, Jeep, PowerSports Vehicles
User Manual
PLUTV46BTA Installation
Speaker Mounting suggestion as below:
Auto Reconnection:
Step 1: Unbolting the mounting bracket.
Step 2: Slide in the buckle with rubber pad attached to the bracket stand
of the speaker. Attach the set to the handle bar of vehicle/ship.
Step 3/4: Attach screw to lock the buckle.
Step 5: Use Butt Connector accessories to Connect Speaker wires (See
Illustration 1,2,3).
BT Pairing and Connection
Power:
- Press and hold the power button to power ON/OFF.
Wireless BT Streaming Connection:
a. Ensure BT ability is activated, then search for the PLUTV46BTA from your
BT-enabled device. The light will turn blue and blinks while waiting for BT
connection.
b. The PLUTV46BTA BT Network Name will appear as “PyleUSA” (No password is
required for connecting).
c. When the BT is connected, the light will turn blue and stops blinking.
AUX-IN:
a. Double click power button to switch BT mode to Aux-in mode.
Auto Reconnection:
a. When the device is out of the BT range, BT will be disconnected
automatically, the light turns blue while blinking.
b. BT will automatically reconnect when detected in range again in 10 minutes.
c. Disconnected BT after 10 minutes, you need to process BT connection steps
(above) to reconnect BT again.
d. If the other device occupied the BT during this period (10mins), you need
to process BT connection steps (above).
e. If there is no connection during this period (10mins), it will turn to
standby mode.
Playing Music
- Press and hold 3 seconds for Power ON or OFF
- Short press to play music or pause
- Double click power button to switch BT mode to Aux-in mode
- Short press for next track
- Short press for previous track
- Press and hold VOL+ for volume up
- Press and hold VOL- for volume down
Installation (Seamless Flush Mount)
Size: 96mm / 3.8’’ (Out Diameter)
76mm / 3.0’’ (Cutout Diameter)
93mm / 3.7’’ (Depth)
Wire Diagram
| Wire Color | Description |
|---|---|
| Red | Battery (+), 12dc |
| Black | Battery (-), Ground |
| White | Output L (+) |
| White/Black | Output L (-) |
| Gray | Output R (+) |
| Gray/Black | Output R (-) |
System Features:
- Waterproof Rated Speakers + Wireless BT Controller System Kit
- Universal Mount System for Convenient Audio Control
- Wireless BT Music Streaming Ability
- Waterproof-Rated Marine Grade Construction
- Water-Resistant, Weatherproof Design
- Compact & High-Powered System Output
- Used For Cars, Trucks, ATV’s, UTV’s, 4×4’s, Boats, Marine Watercrafts, & PowerSport Vehicles
What’s in the Box:
- (2) 4”-inch Marine Speakers
- Amplified Wireless BT Streaming Control Unit
- (2) 2 Meters Speaker Wire
- Audio Connection Cable, 3.5mm
- (2) 5.91” x 0.75” x 0.24” -inches Rubber Pads
- (2) 6.5” x 0.75” x 0.08” -inches Rubber Pads
- (4) Butt Connector (Red Color For A.W.G 16-22)
Wireless BT Control Unit:
- Built-in Wireless BT Audio Receiver
- 2-Channel Amplifier Style
- Works with All of Today’s Latest Devices
- Smartphones, Tablets, Laptops, Computers, etc.
- Connect & Stream Audio from Additional External Devices
- Aux (3.5mm) Input
- Full Range Stereo Sound Reproduction
- Integrated Power Wiring Harness
- Pre-Amp RCA Out to Any OEM/Factory-Made Mono-Block/ Full-Range Amplifier
- Flush Mount Mounting Kits Included
- Universal Vehicle Mounting
- Can be In-Console Flush Mounted
- Anti-Thump Turn-on
- Soft Turn On/Off Option
- Overload & Power Protection Circuitry
Wireless BT Control Unit Technical Specs:
- Power Output: 800 Watt MAX
- 2×200 Watts RMS @ 4 Ohm
- 2×400 Watts MAX @ 4 Ohm
- Wireless BT Version: 5.0
- Wireless BT Network Name: ‘PYLEUSA’
- Wireless Range: 30’+ ft.
- Amplifier Type: Class D
- Marine Grade IP65 Rating
- T.H.D: 0.1%
- S/N Ratio: > 95 dB
- Channel Separation: > 65 dB
- Frequency Response: 10 – 40 kHz
- Fuse: 10A
- Power: DC 12V
- Unit Dimensions (Diameter x Depth): 3.8” x 4.17” – inches
Marine Speakers:
- Pro Audio PowerSport Speakers
- Sound System: (2) x 4”Woofers + (2) x 0.5” Tweeters
- 2-Way Full Range Stereo Sound Reproduction
- Quick-Connect Spring-Loaded Speaker Terminals
- Impressive Bass Response
- Sleek Design, Machine Molded Speaker Cabinet Housing
- Rugged, Universal Mount Bracket Design for Roll-Bar/Roll-Cage
Marine Technical Specs:
- Power Output: 800 Watt MAX
- Marine Grade Waterproof Rating: IP-X5
- Speaker Style: Passive Speakers
- Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
- Tweeter Type: Neodymium Dome (x2)
- Frequency Response: 85Hz-20kHz
- Impedance: 4 Ohm
- Magnet Type: 20 oz. Circuit
- Mid-Woofer Voice Coil Type: 1.0″, Aluminum
- Sensitivity: 90 dB +/- 2 dB @ 1M/1W
- Universal Mounting Brackets Roll-Bar/Roll-Cage Diameter: 1.25” ~ 2.0” -inches
- Power Supply: DC 12V
- Speaker Size (Front Diameter x Length): 5.6” x 7.3” -inches (Each)
PyleUSA.com VISIT US ONLINE:
Have a question?
Need service or repair?
Want to leave a comment?
PyleUSA.com/ContactUs
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>