EATON EMT6-DB Thermistor Overload Relay Instruction Manual
- June 9, 2024
- EATON
Table of Contents
EATON EMT6-DB Thermistor Overload Relay Instruction Manual
Electric current! Danger to life! Only skilled or instructed persons may carry out the following operations.
CSA
⚠ WARNING
Transient surge suppression shall be installed on the line side of this equipment and shall be rated n/a V (phase to ground), 275 V (Phase to phase), suitable for overvoltage category III, and shall provide protection for a rated impulse withstand voltage peak of 4 kV.
UL/CSA
– Max. Surrounding air temperature rating 40 centigrade degree
– Use copper conductors only
– For use in pollution degree 2 environment only
Mounting
- Rated control supply voltage (A1/A2)
- Auxiliary contact (break contact 21/22)
- Supply LED (green)
- Test/Reset
- Manual and automatic reset
- Tripped LED (red)
- Auxiliary contact (make contact 13/14)
- Thermistor (T1/T2)
- Remote reset (Y1/Y2)
HAND
⚠ DANGER
Danger to personnel and machines. In function “HAND” the released relay
switches on automatically after a voltage dip.
AUTO
⚠ DANGER
Danger to personnel and machines. In function “AUTO” machines can restart
automatically after a release.
EMT6 and EMT6 (230 V) can only be operated in function “AUTO”.
Test/Reset
⚠ DANGER
EMT6 and EMT6 (230 V) can only be operated in function “AUTO”
EU: Eaton Industries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
UK: Eaton Electric Ltd., P.O. Box 554, Abbey Park, Southampton Road,
Titchfield, PO14 4QA, United Kingdom
USA: Eaton.com/eatoncare
+1 877-386-2273
Eaton.com/contacts
Eaton.com/aftersales
Eaton.com/documentation
© 2022 Eaton Industries GmbH
02/22 IL121016ZU
Eaton.com/recycling