COOLMUSIC DM35S Personal Monitor Amplifier Owner’s Manual
- June 6, 2024
- COOLMUSIC
Table of Contents
DM35S
Personal Monitor Amplifier
OWNER’S MANUAL
SHENZHEN COOL MUSIC TECH CO., LTD
www.coolmusic-tech.com.cn
www.cool music-tech.co
Indicator light
10. AC INLET SOCKET Connect the included AC power cable to this inlet.
11. DI out This socket provides a balanced low impedance output signal from
the preamplifier taken before the Volume but after any tone correction, used
for direct injection of amplifier signal to a mixing desk or additional power
amplifier.
-
INPUT 1
Connect your electric drum. -
INPUT 2
Connect your electric drum. -
INPUT LEVEL
This knob adjusts the volume of channel one. -
INPUT2 LEVEL
This knob adjusts the volume of channel two. 5. BASS Adjust the amount of low- frequency level. -
TREBLE
Adjust the amount of high-frequency level. -
POWER INDICATOR
Indicator lights when power on. -
POWER SWITCH
Switch ON/OFF the machine.
WARNING!-IMPORTANT SAFETY INSTRUCTIONS BEFORE CONNECTING, READ INSTRUCTIONS
- Please use the supplied power cord when using. If you want to replace the power cord, please use the confirmed power cord under professional guidance.
- Do not attempt to short the fuse inside the power outlet or use a fuse with a value.
- Do not repair the machine yourself! Opening the case may expose your body to a dangerous voltage or other hazardous conditions. For repair or maintenance, please contact qualified service personnel for service.
- If you are qualified to service personnel, please note that the equipment needs to be repaired in case of any damage, including broken power cable, damaged socket head, liquid inflow, or solids falling into the equipment and equipment. a situation in which the machine is not working properly when placed in a humid or rainy environment
- Do not store or use the speakers in a damp environment
- Liquid-filled items such as vases should not be placed on the equipment
- Unplug the power cord from the power outlet when the device is not in use for an extended period of time.
- When you need to plug in the power cord to the outlet, be sure to keep away from the pedestrian channel and keep the power cord in time after use.
- Make sure that the power socket to which the speaker’s power cord is connected is properly grounded.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS!
Thank you for choosing to purchase the DM35S drum speaker designed and
manufactured
by our company. Please read this manual carefully before using this product
for the first time.
SPECIFICATION
Power Output: 40W RMS Power
Consumption: 50W
Impendence
INPUT 1: 68k ohm
INPUT 2 : 68k ohm
EQ Bass : +/- 15dB@60Hz
Treble : +/- 15dB@10kHz
Speaker: Coaxial (10 inch woof + 1 inch tweeter)
Dimensions : 430mm390mm340mm (1-1WID)
Net Weight: 13KG
Gross Weight : 15KG