Suzhou Supermax Smart System Co Ltd 7200WPBT 2D Barcode Scanner User Guide

May 15, 2024
Suzhou Supermax Smart System Co Ltd

**Suzhou Supermax Smart System Co Ltd 7200WPBT 2D Barcode Scanner User Guide

**

Product Using Instruction

Power on
Press and hold the button for 3 seconds until you hear the power-on soundThe light comes on after power-on
Power off
Press the button
or
Scan the barcode

Connection switching
Connection switching
Serial number : S23091300001 (eg.)
If you want to switch from “Connect via Superlead Dongle Connector” to “Connect via Bluetooth setup”, you need to scan the barcode “Bluetooth Keyboard”

Bluetooth Keyboard
Connect to Bluetooth (choose one of three ways)

Serial number: S23091300001(eg.)

Serial number coding rule
| ①Connect via Bluetooth setup:

View device serial number                    Turn on Bluetooth Click to connect

Note: In this connection mode, after the current host successfully connects to the scanner Bluetooth, the scanner can be reconnected to the current host automatically when it reboot.
Host switching method:
You need to find the device’s serial number by setting-Bluetooth on the current host firstly, and then ignore or delete it.

---|---

Bluetooth
connection
APP| 2 : PConnect by scanning APP QR code:
           or         
Scan QR code download                          Application market Scan QR code to connect Bluetooth in the APP
App market download
Note: In this connection mode, the scanner will not be reconnected automatically when it reboot. It is necessary to rescan the APP QR code on the host.
Host switching method:
Scan the APP QR code on the host you want to switch.
| ③Connect via Superlead Dongle Connector:
Plug Dongle into the host
Note: In this connection mode, when the connector is inserted into the host, the scanner can be reconnected automatically when it reboot.
Host switching method:
Plug the connector into the host you want to switch.

Top light and sound prompts

Light color Feature State Sound cue
Not connected to Bluetooth Do not work
Blue Bluetooth connection successful On/Flashing “DEE”
Red Charging while not connected to Bluetooth Steady on
Red Low power alarm under the power-on state Flashing Continuous

intermittent “DEE”
Red & Blue| Charging while connected to Bluetooth| Steady on| –
Blue| Decode successfully| Flash| DEE”

Common configuration code

  • Restore All Factory Defaults

  • Bluetooth Serial Port

  • Switch to Wired Mode

  • Add CR Suffix

  • Add LF Suffix

  • Query Bluetooth Software Version

  • Query Decoder Software Version

  • Never Power Off

Common fault

  1. The serial number of the scanner cannot be found, the scanner cannot be connected to the pos or computer.
    Solution:

  2. Download the Bluetooth connection APP on the host, and then scan the QR code in the APP with the scanner

  3. ..

  4. Scan the barcode “Close Bluetooth”

Close Bluetooth

  2. Shut down and restart the scanner
  3. Scan the barcode “Bluetooth Keyboard”, and find the serial number of the scanner on the host for connection.  

Bluetooth Keyboard

  1. Scanner shuts down automatically, drops the line without operating.
    Solution:

  2. Scan the barcode “Never Power Off”

Never Power Off

2. Scan the barcode “Power Off” to save the setting  

Power Off

  1. The scanner cannot be turned on, charged or scanning.
    Solution:

    Return to factory for maintenance inspection

Product use precautions

  1. Please use the charger and cable that comes with the product to charge. Do not use the charger and cable of the mobile phone or tablet computer to charge, which will cause the machine to burn out and cannot be used, and artificial damage is not within the scope of maintenance.
  2. Keep the charging port dry and do not touch water when inserting the charging cable.
  3. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
  4. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

l’appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. L’exploitation est soumise aux deux conditions suivantes :

  1. l’appareil ne doit pas produire de brouillage,
  2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

ce matériel est conforme aux limites de dose d’exposition aux rayonnements, FCC / CNR-102 énoncée dans un autre environnement.cette eqipment devrait être installé et exploité avec distance minimale de 20 entre le radiateur et votre corps.

Warning : Do not disassemble、hit、crush or throw into fire
Do not put in the high temperature environment,the battery is not allowed to use after soaking
Do not continue to use if the battery has serious bulging

  • * disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
    • leaving a battery in an extremely high temperature surrounding environment that canresult in an explosion or the leakage of flammable liquid or gas;
    • a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Model Name(HVIN): 7200WP-BT, 7100, 7200, 7200D, 7200HP, 7200DHS, 7201, 7202, 7300HP, 7300DHS, 7330, 7350, 7700, 7708, 7800,
PT-6850, 8400 P2D, LV8200, BT-3, 72BS, 72CJ,72IS, 73IS,73MINI,GS-700, Different colors and customers, Electrical performance and structure are consistent.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals