ELMAG 82000 GBM 3-25 TNE Gear Bench Drill Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 82000 GBM 3-25 TNE Gear Bench Drill
TECHNICAL FACTS
- Drilling capacity Ø 25 mm
- Cubature 290x250x580 mm
- Spindle throat 255 mm
- Powerful drive motor 400 V, 2-stage 900 / 650 W
- Smooth-running quality gearbox with highly resilient helical gearing
- 8 speeds 105 – 2,900 RPM
- Drilling spindle with precision bearing
- Clockwise and anticlockwise rotation
- Drilling spindle protection cover
- Drilling depth scale and stop
- Tool ejector
- Precision machined drilling table with T-slots and coolant channel
- Rotatable and height-adjustable drilling head
- Highly resilient, ground steel column with rack
- Emergency off button / no-voltage release
- With 5 meter connection cable and 16 amp EURO-CEE protection plug
- Tool ejection – tool ejection for fast refitting
PRODUCT HIGHLIGHTS
High-speed gear drills 900/650 W
The more often tungsten carbide and stainless steel have to be machined, the
sooner you should opt for a powerful gear drill – also perfect for thread
cutting. Thanks to a gear wheel combination of steel and moulded material, the
powerful GBM 3/25 TNE & SNE are particularly smooth-running. With a top speed
of 2,900 rpm, you have the ideal cutting speed for small holes. For thread
cutting, the machines are available with clockwise and anticlockwise rotation
Standard features
- Keyless drill chuck B 16, 1 – 16 mm
- Taper mandrel MK 3 / B 16
- Reducing sleeve MK 3 / MK 2
- Reducing sleeve MK 3 / MK 1
- Drill drift
- Operating instructions / CE
GBM 3/25 TNE
Helical, super quiet special gearbox with gears made of a steel/moulded
material combination
SPECIFICATIONS
- drilling capacity in steel 25 mm
- thread cutting performance M16
- mandrel holding fixture (screw mandrel) MK 3
- speed range 105 – 2900 rpm
- speed gradually 8
- quill stroke 120 mm
- column diameter 100 mm
- t-slot width 14 mm
- drill head lift 580 mm
- mandrel radius 255 mm
- drill head revolving ± 180 °
- quill distance table min./max. 0 – 580 mm
- drilling table surface 290×250 mm
- motor power (2-stage) 900/650 W
- voltage 400/50 V/Hz
- cubature 290x250x280 mm
- base plate surface 340×570 mm
- height (total) 1150 mm
- Weight 130 kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>