ELMAG 340.278 DG Bomar Metal Bandsaw Ergonomic Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 340.278 DG Bomar Metal Bandsaw Ergonomic
Product Information
Specifications:
- Cutting range: Max
- Saw band length: 27 mm
- Saw band height: Tapered roller bearings
- Saw band width: 1/2 inch
- Cutting angle: Adjustable
- Speed: Variable
- Cutting rate: 1/2 saw blade
- Drive: Industrial drive with frequency converter and helical gearbox
- Engine power: Not specified
- Voltage: Not specified
- Infeed height: Adjustable
- Remnant piece length: Not specified
- Dimensions: L x W x H (not specified)
- Weight: Not specified
Product Usage Instructions
- Setting Up: Place the metal bandsaw on a stable surface. Ensure the power source matches the voltage requirements of the machine.
- Blade Installation: Install the carbide saw blade according to the manufacturer’s instructions. Ensure the blade is tensioned properly.
- Adjusting Cutting Angle: Use the provided controls to set the desired cutting angle for your material.
- Starting and Stopping: Use the start/stop function to control the operation of the bandsaw.
- Chip Removal: Ensure the synchronized brushes are functioning properly to remove chips during cutting.
FAQ :
-
Q: What should I do if the saw blade becomes dull?
A: Replace the saw blade with a new one following the manufacturer’s guidelines on blade replacement. -
Q: Can I use this bandsaw for cutting materials other than metal?
A: It is recommended to use this bandsaw specifically for metal cutting due to its design and blade specifications. -
Q: How often should I lubricate the bandsaw?
A: Refer to the user manual for recommended lubrication intervals based on usage frequency.
OVERVIEW
BOMAR METAL BAND SAW ERGONOMIC 340.278 DG
- Article Number: 78905
- EAN Code: 9004853789052
TECHNICAL FACTS
Manual metal bandsaw
Universal bandsaw with sturdy cast metal frame and 27 mm saw band. The precise
carbide guide of the saw band, in pre-tensioned tapered roller bearings in the
saw frame and synchronized brushes for chip removal are prerequisites for
excellent cutting performance. The saw blade is powered by an industrial drive
with frequency converter and helical gearbox in an oil bath.
Standard features
- Sturdy cast iron frame
- Quick-release vice
- Start/stop function
- Carbide saw blade guides
- Bandsaw blade BI-metal
Special accessories
- LaserLiner laser measurement device
- Micro-spray device 24V
SPECIFICATIONS
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING STONE
- CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>