ELMAG R40E PGM PREMIUM High Speed Column Drill Owner’s Manual

ELMAG R40E PGM PREMIUM High Speed Column Drill

Product Information

Specifications:

• Product Name: PREMIUM HIGH-SPEED COLUMN DRILL R40E PGM
• Article Number: 81036
• EAN Code: 9004853810367
• Technical Facts:
  • Electronic speed regulator
  • Swivel vice bench
  • Machined base plate
  • Thread cutting capacity M24 variable-speed
• Specifications:
  • Drilling capacity in steel: 40 mm
  • Mandrel holding fixture: MK 4
  • Speed range: 45 – 2150 rpm
  • Quill stroke: 135 mm
  • Column diameter: 123 mm
  • Mandrel radius: 300 mm
  • Quill distance table min./max.: 0 – 690 mm
• Motor Power: 2200 W
• Voltage: 400/50 V/Hz
• Weight: 410 kg

Product Usage Instructions

Setting Up the Column Drill:

1. Place the column drill on a stable and level surface.
2. Ensure the power supply matches the voltage requirements of the drill.
3. Adjust the swiveling vice table to the desired angle for your workpiece.

Drilling Operations:

1. Securely clamp the workpiece in the vice table.
2. Adjust the drilling speed using the electronic speed regulator as needed for the material.
3. Select the appropriate drill bit for the desired hole size.
4. Lower the quill to start drilling, ensuring proper alignment.

Maintenance and Safety:

1. Regularly clean the drill and lubricate moving parts to ensure smooth operation.
2. Always wear appropriate safety gear such as goggles and gloves when operating the drill.
3. Disconnect power before performing any maintenance tasks on the drill.

Frequently Asked Questions (FAQ):

• Q: What is the maximum drilling capacity of this column drill?
  A: The maximum drilling capacity in steel is 40 mm.

• Q: Can this drill be used for thread cutting?
  A: Yes, this column drill has a thread-cutting capacity of M24.

• Q: How do I adjust the drilling speed on this drill?
  A: You can adjust the drilling speed using the electronic speed regulator within the range of 45 – 2150 rpm.

DIMENSION

PREMIUM HIGH-SPEED COLUMN DRILL R40E PGM

• incl. swivelling vice table
• Article Number: 81036
• EAN Code: 9004853810367

TECHNICAL FACTS

• Electronic speed regulator
• Swivel vice bench
• Machined base plate
• Thread cutting capacity M24
• variable-speed

SPECIFICATIONS

SPECIFICATIONS

drilling capacity in steel| 40 mm
mandrel holding fixture (screw mandrel)| MK 4
speed range| 45 – 2150 rpm
quill stroke| 135 mm
column diameter| 123 mm
mandrel radius| 300 mm
quill distance table min./max.| 0 – 690 mm
motor power| 2200 W
---|---
voltage| 400/50 V/Hz
Weight| 410 kg

• COMPRESSED AIR TECHNOLOGY
• WELDING TECHNOLOGY
• METALWORKING STONE
• CUTTING TECHNOLOGY
• WORKSHOP TECHNOLOGY
• POWER GENERATORS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>