ELMAG F28 PGM Premium High Speed Column Drill User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG F28 PGM Premium High Speed Column Drill
Product Information
- incl. swivelling vice table
- Article Number: 81033
- EAN Code: 9004853810336
Technical Facts
- Infinitely variable speed control via variator gearbox
- Ergonomic arrangement of the operating levers
- Swivel vice bench variable-speed
- Machined base plate
Specifications
- Drilling capacity in steel: 30 mm
- Mandrel holding fixture (screw mandrel): MK 3
- Speed range: 250 – 2150 rpm
- Quill stroke: 120 mm
- Column diameter: 98 mm
- Mandrel radius: 205 mm
- Quill distance table min./max.: 80 – 775 mm
- Motor power: 1100 W
- Voltage: 400/50 V/Hz
- Weight: 195 kg
Product Usage Instructions
Installation and Setup
- Place the column drill on a stable, level surface.
- Secure the machine in place using appropriate fasteners.
- Ensure all operating levers are in their default positions before connecting power.
Operating the Drill
- Adjust the speed using the variation gearbox according to your drilling requirements.
- Secure the workpiece in the swivelling vice table for stability.
- Lower the quill to the desired depth by adjusting the quill stroke.
- Use appropriate safety gear such as goggles and gloves when operating the drill.
Maintenance and Safety
- Regularly inspect the machine for any signs of wear or damage.
- Keep the drill clean and free from debris to ensure optimal performance.
- Disconnect power before performing any maintenance tasks.
FAQ (Frequently Asked Questions)
-
Q: What is the maximum drilling capacity of this column drill?
A: The maximum drilling capacity in steel is 30 mm. -
Q: How do I adjust the speed of the drill?
A: The speed can be adjusted using the variator gearbox. -
Q: Is it necessary to wear safety gear when operating the drill?
A: Yes, it is recommended to wear appropriate safety gear such as goggles and gloves for protection.
DIMENSION
PREMIUM HIGH-SPEED COLUMN DRILL F28 PGM
- incl. swivelling vice table
- Article Number: 81033
- EAN Code: 9004853810336
TECHNICAL FACTS
- Infinitely variable speed control via variator gearbox
- Ergonomic arrangement of the operating levers
- Swivel vice bench
- variable-speed
- Machined base plate
SPECIFICATIONS
| drilling capacity in steel | 30 mm |
|---|---|
| mandrel holding fixture (screw mandrel) | MK 3 |
| speed range | 250 – 2150 rpm |
| quill stroke | 120 mm |
| column diameter | 98 mm |
| mandrel radius | 205 mm |
| quill distance table min./max. | 80 – 775 mm |
| motor power | 1100 W |
| --- | --- |
| voltage | 400/50 V/Hz |
| Weight | 195 kg |
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING STONE
- CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>