MINKA LAVERY 5295-66A 4 Light Black Coastal Led Incandescent Wall Sconce Instruction Manual
- June 1, 2024
- MINKA LAVERY
Table of Contents
MINKA LAVERY 5295-66A 4 Light Black Coastal Led Incandescent Wall Sconce
Product Information
Specifications
- Model: 5295
- Fixture Type: Wall-mounted
- Maximum Wattage: 60 watts per candelabra base bulb
- Power Supply Requirement: Minimum 90 supply conductors
- Materials: Metal, Glass
Product Usage Instructions
- Shut off the power at the circuit breaker box.
- Remove the old fixture and its mounting hardware if needed.
- Unpack the new fixture and lay out all parts in a clear area, ensuring no small parts are lost.
FAQ
- Q: What should I do if I exceed the specified wattage?
- A: Do not exceed the specified wattage to avoid damage to the fixture and potential safety hazards. Use bulbs within the recommended wattage limits.
- Q: Can I use CFL or LED bulbs instead of candelabra base bulbs?
- A: Yes, you can use CFL or LED equivalent bulbs as long as they are within the specified wattage limit and compatible with the fixture.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
READ AND SAVE THESE INSTRUCTIONS
PREPARATION
- Shut off the power at the circuit breaker box and, if necessary, remove the old fixture, including the mounting hardware.
- Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to lose any small parts necessary for installation.
MOUNTING THE FIXTURE
- Position the mounting plate (B) by fixing holes onto the wall and making marks, drill pilot holes for wood screws (E) into the wall, then insert plastic anchors (A) (Size: 067-1) into holes.
- Secure mounting plate (B) to junction box (Not provided) with junction box screws (D) (Size: #8- 32*0.6” L), then secure to junction box with woodscrews (E) (Size: 8#x1” L) into plastic anchors (A)in wall.
CONNECTING THE WIRES
- Connect the fixture wires to the junction box wires as shown in Fig. 2, making sure all wire connectors are secured. If your outlet box has aground wire (green or bare copper) connect the fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to the mounting plate using the green screw provided.
- Tuck connections neatly into the junction box.
COMPLETING THE INSTALLATION
- Mount fixture body (F) to mounting plate (B), and secure with cap nuts (G).
- Install glass plate (L) onto bracket (H), and secure with washer (K) and screw (M).
- Install (4) four candelabra base bulbs up to 60 watts each or CFL or LED equivalent (Not included) per the fixture specification. (DO NOT EXCEED THE SPECIFIED WATTAGE!) (NE PAS DEPASSERLA PUISSANCE NOMINALE MAXIMALE!)
- Install shade (I) onto fixture body (F), and secure with screws (J).
Your installation is now complete. Return the power to the junction box and test the fixture.
Read User Manual Online (PDF format)
Loading......