MaxLong SE332 Serial Device Server User Manual

June 14, 2024
MaxLong

MaxLong Logo MaxLong SE332 User Manual

Install of Hardware

  1. First please prepare a PC, a HUB and SE332.

  2. Use PC Ethernet to connect with HUB and then use other Ethernet port to connect with SE332.

  3. Insert power cord of SE332. (The Power Light will light about one second on the beginning, SYS Light will bright and turn off the ON/OFF about five seconds, the Internet of RJ45 Light will bright to the green light, it means present to 100Mbps, when the orange light bright once in a while that means the internet had send data, if the data are sending the orange light will been bright continue.

  4. Please confirm the PC IP and the converter whether in the same domain.
    4-1. Modify the PC or NB connect area directly.MaxLong SE332 Serial Device
Server - PC4-2. Click the contentMaxLong SE332 Serial
Device Server - Click4-3. Click the Internet Protocol (TCP/IP) and press the content.MaxLong SE332 Serial Device Server -
Protocol4-4.General  IP move to click IPMaxLong
SE332 Serial Device Server - Protocol 14-5.Key in the IP address, subnet  and DNS.MaxLong SE332
Serial Device Server - address4-6. Press the confirm button than to close this window.MaxLong SE332 Serial
Device Server - confirm button

  5. Click the WEB Browser.

  6. Press Login (If before had set password, please key in the password and then press Login).MaxLong SE332 Serial Device Server - password※Default Username:admin/Password:” “(leave it Blank)

  7. Set the Serial I/O Port (For unfamiliar application, suggestion please do not modify any setting value.)MaxLong SE332 Serial Device Server - setting

  8. Close the setting window or complete the update before to leave.

Test steps for send and. receive data

  1. Open the Super Terminating Machine. 1-1.Key in a name (ex. test) and then press enter.MaxLong SE332 Serial Device Server - test1-2.Choose the TCP/IPMaxLong SE332 Serial Device Server - TCP1-3.Key in the Converter IP and Socket and then press enter.MaxLong SE332 Serial Device Server - Converter1-4.Complete the unlock window of Terminating Machine.MaxLong SE332 Serial Device Server - Complete1-5. Unlock another 101 port and please according 1-1.method to open (please notice the name of 1-1. need different).
  2. General please use the DB9 of NO. 2 pin and NO.3 pin short circuit, the green Terminal Block of T+ connect to R+, T- connect to R- or green Terminal Block of TX connect to RX.
  3. In the Keyboard of key in any character that to display the character.MaxLong SE332 Serial Device Server - Terminal Block
  4. For the above step OK means that the testing complete success oneself.
    MaxLong Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals