contour Balance Wired Keyboard User Manual
- June 7, 2024
- contour
Table of Contents
Product Manual
Box content
- Balance Keyboard Wired
- User Guide
Balance Keyboard Wired – REV 1.0
Function and Media Control Keys
A. Media Control Functions
B. Application Functions
C. Interface Functions
D. Fn Keys*
E. Risers
- The Fn key toggles between function [1-12] and media modes. By default the media keys are active.
Start using your keyboard
Connect the Balance Keyboard to your computer. There are three different ports for the USB cable for it to fit your worktable properly.
Keyboard Tilt
The adjustable legs on the Balance Keyboard have three tilt options:
Keyboard Shortcuts – Function
By default, Balance Keyboard comes with function mode (F1-F12) set to OFF.
Meaning the media keys are active.
To activate function mode, press the Fn key.
To change the default setting to function mode ON, follow the instructions
below:
Press the Fn button and hold.
Press CapsLock and hold.
Press the D button.
Release D button.
Release FN and CapsLock buttons.
To toggle back, use the same instructions but replace the D button with F
button.
Keyboard Shortcuts – PC Mode & Mac Mode
Balance Keyboard is a PC keyboard, compatible with Mac. You toggle between Mac
mode and PC mode as described here.
Mac Mode
For Mac mode hold Fn + Caps lock and press and release M key.
PC Mode
For PC mode hold Fn + Caps lock and press and release the W key.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC Statement
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC: “ before the certification/registration number only signifies
that the Industry Canada technical specifications were met. This product meets
the applicable Industry Canada technical specifications.
Warranty
If there is a functional defect due to faulty manufacturing, we will replace
the product. This warranty does not cover damage that results from misuse of
the product.
Attention!
If you attempt to dismantle the product, you will invalidate your warranty.
For more information please visit: www.contour-design.co.uk
Quay House
The Waterfront
Brierley Hill, Dudley
West Midlands, DY5 1XD
United Kingdom
Phone: +45 70 27 02 27
Email: info@contour-design.com
Tested to comply with FCC and IC standards.