Hasbro F34535L00 Marvel Legends Series Black Panther Electronic Role Play Helmet Instruction Manual
- June 10, 2024
- Hasbro
Table of Contents
Hasbro F34535L00 Marvel Legends Series Black Panther Electronic Role Play
Helmet
BATTERY
- Refer to battery caution information on separate sheet. Retain this information for future reference
USEING
- To adjust fit, remove interior padding. Helmet will stretch for comfort.
- Press button to raise/lower lens and activate lights
- Each short button press activates new 15-second light interval. Press and hold button for 5 seconds for limitless continued light. To exit this mode, short press button again to turn off LEDs.
Product Information
The product is a helmet that comes with internal padding for comfort. The helmet can be adjusted for a better fit by removing the internal padding. The helmet can stretch to provide a comfortable fit. The product also features a light that can be activated by pressing a button. Each short press of the button activates a 15-second light interval, and holding the button for 5 seconds provides limitless continued light.
Technical Specifications
- FCC compliant with Part 15 of the FCC Rules
- Can ICES-3 (B)/NMB-3(B)
- Requires 3 AA LR6 batteries
- Recommended age: 14+
Product Usage Instructions
To adjust the helmet for a better fit:
- Remove the internal padding by following the instructions in the user manual for your language.
- Stretch the helmet to fit comfortably on your head.
- Replace the internal padding.
To activate the light:
- Press the button once for a 15-second light interval.
- Hold the button for 5 seconds for limitless continued light.
- To turn off the LEDs, press the button again.
Note: The product is recommended for ages 14 and above. The product requires 3 AA LR6 batteries, which are not included. Follow the FCC statement and caution provided in the user manual to ensure safe operation of the equipment.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAN ICES-3 (B)/NMB-3(B)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>