AMC iAC120DSP Power Amplifiers DSP Dante Cards Installation Guide

AMC iAC120DSP Power Amplifiers DSP Dante Cards

Product Information

Specifications

• iAC 120 DSP
  • Output power: 1 x 120 W
  • Power consumption : 180 VA
  • Stand by power consumption: 10 VA
  • Frequency Response (100 V) : 32 Hz – 21 kHz
  • THD: 0.07%
  • S/N ratio : 95 dB
  • Input sensitivity : N/A
  • Input impedance: N/A
  • Cooling : Passive cooling
  • Dimensions (H x W x D) : 44 x 430 x 245 mm
  • Weight: 5 kg
• iAC 240 DSP
  • Output power: 1 x 240 W
  • Power consumption: 360 VA
  • Stand by power consumption: 10 VA
  • Frequency Response (100 V): 120 Hz – 20 kHz
  • THD: 0.20%
  • S/N ratio: 92 dB
  • Input sensitivity: N/A
  • Input impedance: N/A
  • Cooling: Forced air cooling with manual/auto control
  • Dimensions (H x W x D): 88 x 430 x 342 mm
  • Weight: 9.4 kg
• iAC 360 DSP
  • Output power: 1 x 360 W
  • Power consumption : 540 VA
  • Stand by power consumption: 10 VA
  • Frequency Response (100 V) : 31 Hz – 20 kHz
  • THD : 0.25%
  • S/N ratio : 98 dB
  • Input sensitivity: N/A
  • Input impedance : N/A
  • Cooling: Forced air cooling with manual/auto control
  • Dimensions (H x W x D): 88 x 430 x 342 mm
  • Weight: 11.5 kg
• iAC 2X240 DSP
  • Output power: 2 x 240 W or 1 x 480 W
  • Power consumption : 720 VA
  • Stand by power consumption: 20 VA
  • Frequency Response (100 V): 35 Hz – 21 kHz
  • THD : 0.16%
  • S/N ratio : 94 dB
  • Input sensitivity: N/A
  • Input impedance : Balanced – 11 k, unbalanced – 8 k
  • Cooling: Forced air cooling with manual/auto control
  • Dimensions (H x W x D): 88 x 430 x 342 mm
  • Weight: 8 kg (for single channel), 9.4 kg (for dual channel)

Introduction

Single and two channel Class-D amplifiers for 100 V and low impedance systems. Electronically controlled amplifier circuit, easy menu navigation with rotary controller and LCD. Silent fan mode, DSP processing: 6-point parametric EQ, limiter, gate, delay. Balanced Phoenix & Stereo RCA inputs and audio link outputs. RS-232 port for full control and status feedback allows integrating iAC amplifiers into large and complex audio systems that can be automated or controlled remotely. iAC 2×240 DSP features internal input-output routing and bridging. All models are available with an optional Dante card for use with digital audio network systems.

Technical Specifications

Technical Specifications| iAC 120 DSP| iAC 240 DSP| iAC 360 DSP| iAC 2X240 DSP
---|---|---|---|---
Output power| 1 x 120 W| 1 x 240 W| 1 x 360 W| 2 x 240 or 1 x 480 W
Power consumption| 180 VA| 360 VA| 540 VA| 720 VA
Stand by power consumption| 10 VA| 10 VA| 10 VA| 20 VA
Power supply| ~ 230 V, 50 Hz
Outputs| 1 x Phoenix power output, 1 x Phoenix audio link
Inputs| 1 x Balanced Phoenix, 1 x Stereo RCA Optional: Dante digital audio 1 x RJ-45
Frequency Response (100 V)| 120 Hz – 20 kHz
Frequency Response (4 ohm)| 32 Hz – 21 kHz| 31 Hz – 20 kHz| 31 Hz – 20 kHz| 35 Hz – 21 kHz
THD| 0,07 %| 0,20 %| 0,25 %| 0,16 %
S/N ratio| 95 dB| 92 dB| 98 dB| 94 dB
Input sensitivity|  |  |  |
Input impedance| Balanced: 11 kΩ, unbalanced 8 kΩ
Remote control| RS-232
Tone control (over RS-232)| 6-band parametric EQ
Cooling| Passive cooling| Forced air cooling with manual / auto control
Dimensions (H x W x D)| 44 x 430 x 245| 88 x 430 x 342
Weight| 5 kg| 8 kg| 9.4 kg| 11.5 kg

contact

AMC® BALTIC Neries kr. 14A, LT-48397, Kaunas, Lithuania / (370 37) 308585/www.amcpro.eu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>