CareCo EragoPro Seat Belt Instruction Manual
- June 12, 2024
- CareCo
Table of Contents
CareCo EragoPro Seat Belt
Product Information
- The product is a seat belt designed for use in a vehicle. It is manufactured by CareCo (UK) Limited and is suitable for attaching to a seat or seat frame in order to secure the user during travel.
- Manufacturer: CareCo (UK) Limited
- Address: 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
TOOL REQUIRED
- 1x Hex Wrench
Attaching the seat belt
- Remove the side panel rear Velcro (1).
- Use a hex wrench to remove the lower backrest canvas retaining bolts (2).
- Insert the seat belt between the backrest canvas and the frame (3).
- Secure the seatbelt Velcro loop.
- Reinstall the lower backrest canvas retaining bolts using a hex wrench (4).
- Reattach the side panel rear Velcro (5).
- Repeat on the other side.
- Adjust the user seatbelt to the desired length (6).
CareCo (UK) Limited
- 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>