HOOKE ROAD BXG.8928 Bronco Side Steps Bars Stainless Steel Plates Instruction Manual

MAKE A DIFFERENCE

BXG.8928 Bronco Side Steps Bars Stainless Steel Plates

Tools required:

a. Drive Socket Ratchet Wrench;
b. 16 mm Deep Socket;
c. 13 mm Wrench;

Installation time:

About 40 minutes, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8928), please scan the QR code.

https://drive.google.com/drive/folders/1en58bdoSMFsfY2BesyaPwoIOSfPUtZGR?usp=sharing

Installation instruction:

Passenger Side Installation
Step 1 : Ready to install our side step. Distinguish the Side Steps and the Mounting Brackets (According to the A, B, C). Note: The longer side of the “B” mounting bracket is facing the rear of the vehicle.

Step 2 : Install the mounting bracket with the (M10) Hex Bolts. Repeat this step for the other mounting brackets. Don’t tighten up those bolts.

Step 3 : Lift up the side step into the position. Make sure that mounting locations are correct.

Step 4 : Install the carriage bolts (M820), flanged nylon lock nuts (M8) in the both side holes. Use the hex bolts (M1025), split lock washer (D10), flat washer (M10251.5) in inside holes. Tighten up those bolts.

Step 5 : Repeat the same installation method in the driver side.
Step 6:
The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>