SLV 1007594 Wall Light Instruction Manual
- June 1, 2024
- SLV
Table of Contents
SLV 1007594 Wall Light
Product Information
- specifications:
- Input Voltage: 200V-240V
- Frequency: 50/60Hz
- Light Source: LED G9 15W max.
- Dimensions: 20 x 20.5 x 10 cm
- Weight: 1.08 kg
Product Usage Instructions
- Safety Instructions:
- Installation should be done by an approved electrician following local regulations.
- Ensure the product is used as directed and on appropriate surfaces.
- Only use LED lamps with the product and operate in dry indoor areas.
- Disconnect the luminaire from the mains before any maintenance.
- Lamp Replacement:
- Disconnect the product from the mains and allow it to cool down.
- Use suitable light sources: LED, G9, maximum 15W.
- Care and Storage:
- Regularly clean external surfaces with a slightly moistened cloth and store the product in a dry and clean place.
- Installation:
- Switch off the mains before installation.
- Use only described accessories and suitable fastening materials.
- Wall surface mounting is recommended according to the provided figure.
- Electrical Connection:
- Ensure proper wire connections and check for secure fixation and functionality.
- Equip flexible wire ends with suitable wire ferrules for safety.
FAQs
- Q: Can I use halogen bulbs with this product?
- A: No, this product is designed to be used only with LED lamps.
- Q: What should I do if I suspect a defect in the product?
- A: Take the product out of service immediately and contact your dealer or a qualified electrician for assistance.
- Q: How should I clean the product?
- A: Clean external surfaces regularly with a slightly moistened cloth. Ensure the product is disconnected from the mains before cleaning.
PRODUCT INSTRUCTION
INSTRUCTION MANUAL PART A Wall Light
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Technical Details are subject to change.
Product Operating
Operating Manual PART B Wall Light 1007594 …95
- Read the manual carefully and keep it for further use!
- Safety advice for installation and operation.
- Disregarding may lead to danger of life, burning or fire!
- Any work on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children are not harmed by the product.
- Additional safety advice =
Use As Directed
- Safety class I ( ) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only with LED lamps.
- Operate only in dry indoor areas.
- Do not strain mechanically or expose to strong dirt contamination.
Lamp replacement
- Disconnect the luminaire from the mains and let it cool down.
- Suitable light sources: LED, G9, 15W max.
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for wall surface mounting.
- Install as shown in the figure.
Electrical Connection
Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
- Check secure fixation and proper function!
© 0001 28.06.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>