Maxxima MCL-712705 LED Motion Sensor Flush Mount Ceiling Light Fixture Installation Guide
- June 1, 2024
- Maxxima
Table of Contents
Maxxima MCL-712705 LED Motion Sensor Flush Mount Ceiling Light Fixture
Specifications
- Model: MCL-712705
- Brand: Maxxima
- Color Temperature: Adjustable
- Mounting Options: Ceiling Flush Mount, Recessed Housing Retrofit
- Warranty: 3 years limited warranty
Product Usage Instructions
Ceiling Flush Mount Installation
- Turn off power by switching off the circuit breaker or removing the fuse.
- If replacing an existing fixture, disconnect it.
- Choose the desired color temperature.
- Remove the orange E26 connector from the fixture.
- Secure the mounting plate to the junction box using the supplied screws, aligning the holes.
- Thread the supply wires through the mounting plate.
- Connect the wires: black to hot, white to neutral, and ground to green/yellow wire using wire nuts.
- Tuck all wires safely inside the junction box.
- Push the fixture into the mounting plate until fully locked and secure.
Recessed Housing Retrofit Installation
- Attach torsion springs to the mounting plate.
- Secure the mounting plate on the fixture.
- Screw the E26 adapter into the recessed can socket base and connect to the E26 bulb.
- Install torsion spring arms into the spring brackets within the housing.
- Push the LED fixture into the recessed housing until the trim ring is flush with the ceiling.
Installation is now complete. Restore power to make the light operational.
FAQ
-
Q: What is the warranty coverage for Maxxima products?
A: Maxxima offers a 3-year limited warranty covering defects in material and workmanship for original purchasers. The warranty does not transfer and applies to the original installation. -
Q: How can I contact Maxxima for support?
A: You can reach Maxxima via email at [email protected] , phone at 866-MAXXIMA (629-9462), or visit their website at www.maxximastyle.com .
Motion Sensor LED Disk Light Installation Guide
MCL-712705
www.maxximastyle.com
WARNINGS
- Risk of fire or electric shock.
- If you are unfamiliar with electrical installations, consult a qualified electrician before proceeding.
- Turn power off from electrical panel before installation or maintenance.
- Do not make or alter any holes in the wiring enclosure or modify any electrical components.
CAUTIONS
- Intended for installation in accordance with local codes and the National Electric Code (NEC).
- This fixture is designed for use with 120VAC, 50/60Hz only.
- IC rated.
- Supply conductors must be rated for at least 90°C/194°F.
- Covered ceiling mount only.
- Suitable for wet locations.
INSTRUCTIONS
-
Ensure the power has been turned off by switching the circuit breaker to the off position or by removing the fuse from the panel.
-
If replacing an existing fixture remove and disconnect the existing fixture.
-
Select the desired color temperatures
Ceiling Flush Mount: -
Remove the orange E26 connector before proceeding to the next step.
-
Secure the mounting plate to the junction box using the supplied screws by aligning the appropriate holes. Thread the supply wires through mounting plate, see figure 1.
-
Using the supplied wire nuts, connect the black wire to the supply hot wire, connect the white wire to the supply neutral wire, and the ground (green/bare copper) to the green and yellow wire, see figure 2.
-
Ensure all wires are tucked safety inside the junction box.
-
Push the fixture into the mounting plate and make sure the fixture is fully locked in and secure, see figure 3.
Recessed Housing Retrofit: -
Install the torsion springs to the mounting plate, see figure 4.
-
Secure the mounting plate on the fixture, see figure 5.
-
Screw the E26 adapter into the socket base inside the recessed can and connect the adapter to the E26 bulb, see figure 6.
-
Squeeze the torsion spring arms and install into the spring brackets within the housing, see figure 7.
-
Push the LED fixture into the recessed housing until the trim ring is flush with the ceiling, see figure 8.
-
Installation is now complete. Restore power, the light is now operational.
3 YEAR WARRANTY
Maxxima extends a 3 year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxxima will replace any warrantied product to the original consumer/purchaser if the product fails because of defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby assume any obligation whatsoever beyond sending a free replacement product.
- [email protected]
- 866-MAXXIMA (629-9462)
- www.maxximastyle.com
- 125 Cabot Court Hauppauge, NY 11788