SYNACORP RFID Copier Duplicator i-Copy V300CD-PRO User Manual
- June 9, 2024
- SYNACORP
Table of Contents
SYNACORP RFID Copier Duplicator i-Copy V300CD-PRO
Introduction
Easily duplicate your access card or key FOB with this Handheld V300CD-PRO. Manual key input supported so that you can manually input the serial number if you do not have the physical access to the card / tag.
Features
- 2.9-Inch HD full color LCD display, multilingual English & Chinese.
- Supported frequency 125KHz, 250KHz, 375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000 KHz & 13.56MHz.
- Comes with keypad for easy manual card/tag number input.
- Can use with battery (4pcs AAA Battery) or with 5v Micro USB power input sources (Compatible with 5v phone charger, Power bank, PC etc.).
- Buzzer indicator for operation.
- PC Software included for more advance features.
Device Overview
Procedures
A. How to copy the RFID cards /tags:
- Press the “ON/OFF” button and accept the Disclaimer term menu by click on ‘OK’ key.
- Place the original cards on the back of the Device. Make sure to place it on the Scanner area.
- Press the “SCAN” key, the Device will enter scanning mode. It will display the card type and the card ID/UID if success.
- Once the ID/UID and Card type displayed, swap the original card with the copy card / tag on the scanner area.
- Press the “Write” key to initiate the Duplicate / Cloning process. Once the process completed the it will display “write the card successfully!”.
- Once cloned both card should have same ID/UID when scanned.
B. Connecting Device with PC with provided software (Windows).
- Connect the device with PC via provided Micro USB cable. Press ‘ON/OFF’ key and stay on the Disclaimer menu, do not press the ‘OK’ key yet.
- The device will only enter U-Disk mode when user connect it to PC and stay on Disclaimer menu.
- On your PC, open My Computer / This PC to access the U-Disk storage device.
- Inside the drive run the NFC PM-ProEnInstall.exe to install the program. Once installed new shortcut will displayed on your Desktop named NFC PM-ProEnV1.1.exe, launch the program.
- Press the ‘OK’ to close the Disclaimer menu and a pop-up window will display “USB Connected…” on the Device. This indicate that the Device successfully connected to PC.
Program Features
HighFreqCard – For 13.56 MHz card.
LowFreqCard – For 125 KHz to 1000 KHz cards
DataCompare – To compare dumped data between cards
System – Update Center
For purchase & enquiries, please contact sales@synacorp.com.my or call 04-5860026
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>