TRACKCOL Tracky PDF S 005 Instruction Manual
- June 3, 2024
- TRACKCOL
Table of Contents
TRACKCOL Tracky PDF S 005
Overview
The temperature data logger is mainly used to monitor and record the
temperature in the storage and transportation of cold chain products in food,
agri, horti and medical sector.
The recorder can be connected to a computer via its USB port. It has a CR2450
lithium battery, and protection is up to IP67. There is a barcode on the outer
packaging to identify the product.
Introduction
Technical parameters
Before the recorder leaves the factory, all parameters have been pre- configured. Some can be customized according to your needs.
- Temperature range: -20°C-+ 60°C
- Temperature accuracy: 0.5°C
- Recording interval: 10 minutes
- Recording time: 60 day
- Temperature resolution: 0.1C
- Data storage capacity: 30000
Sending a tracker
Leave the tracker in the transparent packaging bag. 
Press and hold the start/stop (green) button for 6 seconds to start recording. The green LED will flash 5 times. You can now attach the tracker to your shipment.
Receiving a tracker
Open the outer transparent packaging bag and take the datalogger out of the
package. Press the start/stop (green) button and hold for 6 seconds. The red
LED will flash 5 times. The recording has stopped. 
Insert the logger into the USB port of the computer to view
the PDF/CSV report. The green and red LED will stay on until the recorder is
removed from the computer