HOOKE ROAD BXG.9802-S 4Runner Running Boards 7 Drop Down Side Step Bar Rock Sliders Instruction Manual
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.9802-S 4Runner Running Boards 7 Drop Down Side Step Bar
Rock Sliders
Specifications:
- Product Name: Side Steps
- Model: BXG.9802-S
- Contents:
- 8 Hex Bolts (M8*25)
- 8 Split Lock Washer
- 8 Flat Washer
- Picture: D8 M8202
Installation Time:
About 40 minutes, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.9802-S), please scan the QR code.
Installation Instructions:
- Passenger Side Installation
- Step 1: Remove the factory side steps. And distinguish the side steps. (According to the mounting brackets, the front bracket has two mounting holes).
- Step 2: Preparing to install our side steps. Make sure that mounting locations are correct.
- Step 3: Lift up the side step, align it with the holes, use M8*25 hex bolts to secure the side step to the vehicle. Tighten up all of bolts.
- Step 4: Repeat the same procedure on the other side.
- Step 5: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
FAQ:
Q: How do I know if the side steps are compatible with my vehicle?
A: The side steps are designed to be universal, but it’s recommended to
check the mounting locations and dimensions before purchasing.
Q: Can I install the side steps alone?
A: While it’s possible to install the side steps alone, having assistance
from another person may make the installation process easier and faster.
Contents
Side Steps
Tools required:
- Drive Socket Ratchet Wrench
- 13mm Deep Socket
Installation time
About 40 minutes, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.9802-S), please scan the QR code.
Installation instruction
Passenger Side Installation
Step 1: Remove the factory side steps. And distinguish the side steps.
(According to the mounting brackets, the front bracket has two mounting
holes).
Step 2: Preparing to install our side steps. Make sure that mounting locations are correct.
Step 3: Lift up the side step, align it with the holes, use M8*25 hex bolts to secure the side step to the vehicle. Tighten up all of bolts.
Step 4: Repeat the same procedure on the other side.
Step 5:
The installation is complete. We hope you enjoy a wonderful off-road life with
this quality Hooke Road product!
Attention
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Feel Free To Share Your Vehicle @HookeRoad4x4
With The Hashtag #hookeroad If You’d Like
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>