MINKA LAVERY 5701-66A Wall Light Instruction Manual
- June 1, 2024
- MINKA LAVERY
Table of Contents
MINKA LAVERY 5701-66A Wall Light Instruction Manual
MOUNTING THE FIXTURE (FIG. 1)
SOCKET RING #SKT-RING-26
A-020-109140
Mounting Plate 1
Mounting Screw 2
Ground Screw * 1
Glass# G5703
-
Shut off the power supply at the fuse box or circuit breaker. If necessary, remove the old fixture from wall. Including the mounting hardware.
-
Carefully remove new fixture from carton and check that all parts are included as shown in the illustration.
-
Attach mounting plate (A) to outlet box (Not included) using outlet box screws (B). The side of mounting plate marked “GND” must face out.
-
Attach fixture wall plate (C) over mounting plate (A) and secure with screws (D) tightly.
-
Place glass shade (F) over socket (E) and secure with socket ring (G)
-
Install the bulb (Not included) in accordance with fixture’s specifications. ( DO NOT EXCEED THE MAXIMUM WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).
CONNECTING THE WIRES (FIG. 2)
-
Connect the electrical wires as shown in Fig.2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting strap using green screw provided.
-
Tuck wire connections neatly into outlet box.
Your installation is now complete. Return power to the outlet box and test the
fixture
Note: Illustration (Fig. 1) & (Fig.2) on this manual is for
installation purposes only. It may or may not be identical to the fixture
purchased.
**WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
**
Documents / Resources
|
MINKA LAVERY 5701-66A Wall
Light
[pdf] Instruction Manual
5701-66A Wall Light, 5701-66A, Wall Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>