ELMAG Cebora Tig Welding Machine PFC Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG Cebora Tig Welding Machine PFC
WIN TIG AC-DC 270/T SYNERGY, art. 394
- “water-cooled as an option”
APPLY NOW FOR UP TO 24 MONTHS’ WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-
product within 15 days of purchase.
CEBORA serial no.
- Article Number: 55906
- EAN Code: 9004853559068
TECHNICAL FACTS
TIG Set
- WIN TIG AC-DC 270/T
- Transport trolley
- Operating instructions
PRODUCT HIGHLIGHTS
WIG SYNERGY for quick and correct setting
Automatic parameter setting and electrode display after entering material,
thickness and welding position
Equipped with a 7” LCD touchscreen and user-friendly encoder
- Easy parameter selection is also possible with welding gloves
- All settings are easy to adjust thanks to the large LCD and the simple and intuitive graphics
TIG CYCLE – Complete welding cycle control
Excellent adjustment and controllability of all welding parameters
TIG WAVE – Selection of different waveform combinations
- Optimal adjustment of the penetration depth and cleaning effect
- In AC TIG mode independent adjustment of amplitudes and times in waveform, burn-in and cleaning effect
- Mix function available to improve welding on cold parts
- Minimum DC from 3 amps or AC from 5 amps
- Enables optimum weld seams on profile edges of very thin stainless steel, while the 5 amp AC allows welding of very thin pieces of aluminium (e.g. edges on turbine blades)
- AC frequency adjustable from 50-200 Hertz
- High pulse frequencies allow focussing of the welding arc more closely on the area to be welded
- The stitch weld option allows the completion of welds that must be perfect in terms of heat input and penetration depth
Fast spot
Enables fast spot welding with minimal heat input thanks to individual
adjustment (10 ms intervals) of welding and time interval
Pulsed DC TIG and PulsXP mode
With pulse frequency adjustment options of up to 15 KHz, it is possible to
achieve an extremely focused arc with very high welding speed (high
productivity)
APC function in TIG DC mode
- This new feature allows automatic adjustment of the welding current to the arc height to maintain a constant weld pool at high welding speed and minimal deformation of the component
Model 340/T with user interface
LAN connection with integrated web server for remote maintenance, fault
analysis and backups
Application examples
- Production & steel construction companies
- Metal, railing & portal construction
- Machine, plant & tank construction
- Series & contract manufacturing
Materials
- Steel
- CrNi
- Copper
- Aluminium
SPECIFICATIONS
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances, e.g. V-belt tension and spindle concentricity
Testing of all machine functions
- For lathes, in addition
- Lathe chuck reassembly with the marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
- For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>