Foiresoft W20-84 Motorized Zebra Roller Light Filtering Blinds User Manual

Foiresoft W20-84 Motorized Zebra Roller Light Filtering Blinds

Product Information

Specifications

• Motorized Zebra Roller Blinds
• Dimensions: 5643mm (22.15 inches) x 69mm (2.7 inches) x 67mm (2.6 inches)
• Parts: Motor, LED Light, Charging Port, H Button, Antenna, Side Cover, End Plug, Roller Tube, Top Header, Shade Fabric, Bottom Rail End Cap, Bottom Roller Plug, Bottom Roller, Bottom Bar
• Dimensions:
  • Outer diameter: 30mm Inner diameter: 28mm
  • Thickness: 1mm

Installing Tips

1. Make sure the blinds are fully rolled up to ease the installation.
2. Confirm the direction of the header’s front side and back side before installing.
3. Check the space for check if the surface is flat to ensure that the blinds will be able to be installed beautifully.
4. Check the components included are all complete. If you are missing some parts, please reach out to us for replacement.

PRODUCT WARRANTY

Foiresoft provide a limited warranty service for 6 months after the date of purchase. Not only blinds but also the motor and remote controller. The support we provide under the limited warranty is only available for manufacturing defects (i.e, material defects, workmanship that cause product failure to operate).

What is covered?

• Wrong Type, Color, and Size
• Package Damaged
• Missing Accessories for blinds (e.g. Side cover for top header & bottom bar, installation parts)
• All internal mechanisms
• Repairs and/or replacements will be provided with the closest equivalent of the product

NOTE

• For the issues mentioned above (wrong type, color, size, damage/defective product, Malfunction), The issue needs to be accurately identified therefore order number, product size, and pictures or videos must be provided for the part where the issue occurred.

What is NOT covered?

CONTACT INFORMATION

Foiresoft Customer Service:

• URL: www.amazon.com/hz/help/contact/ASRGLZI3ITAPZ
• Email: contact.foiresoft@gmail.com

Scan

GETTING STARTED

INCLUDED COMPONENTS

• Order with below 6 units of motorized blind will include one remote control and one cable.
• Cable is offered as a complimentary component. The cable is not covered by warranty.

TOOLS YOU MAY NEED

(NOT INCLUDED)

PARTS NAME

1. Side Cover
2. End Plug
3. Roller Tube
4. Top Header
5. Motor
6. Shade Fabric
7. Bottom Rail End Cap
8. Bottom Roller Plug
9. Bottom Roller
10. Bottom Bar
11. Antenna

PARTS DIMENSIONS

HOW TO INSTALL

INSTALLING TIPS

• Make sure the blinds are fully rolled up to ease the installation.
• Confirm the direction of the header’s front side and back side before installing.
• Check the space for check if the surface is flat to ensure that the blinds will be able to be installed beautifully.
• Check the components included are all complete. If you are missing some parts, please reach out to us for replacement.

Marking the bracket location

• Before marking the bracket location, please make sure that the location for bracket instalment won’t interfere other components including the blind’s header. (Refer for bracket dimensions.)

Installing the C-Clamp direction

• Please refer to the explanation picture for checking the right C-Clamp direction for instalment.

Installing the blinds

• Install the front of the header with a flat side forward so that the color is visible. Please make sure the installment directions.

CEILING MOUNT

Preparation

Ceiling Mount

WALL MOUNT

Wall Mount

THINGS TO KNOW BEFORE USE

Paring Motor with Contorller

• If buying one blind, the remote is pre-connected and ready for use upon delivery.
• For two or more blinds, will be shipped in unpairing condition; Please connect them manually upon receipt.

How to pair the remote control with blinds?

1. Press the H button on the motor until the blinds jog ONCE.
2. Choose any empty channel you prefer to pair with the blinds.
3. Press the ‘P’ button on the backside of the remote control until the blinds jog TWICE.

The P button must be pressed Within 10 sec of choosing the channel.

PRECAUTIONS FOR USING

ADJUSTING THE FABRIC

• Before the first use, lower the blinds all the way down and locate the blinds’ fabric to the center.
• If the fabric is not located in the center of the roller tube, it might cause damage by tearing on the side part of the fabric.

REPLACING ROLLER FABRIC

NOTE

1. During the replacement process, make sure the antenna does not get entangled inside of header.
2. In the case of replacing the Top Header, not the fabric, please open both side covers and slide the fabric onto the new header.

INFORMATION FOR TOP AND BOTTOM GAP

HEAEDR

• Due to working mechanism, there’s a size gap between the fabric and the header.
• The total size gap will be around 1 inch and the fabric usually will be off centered because the motor device parts are all on the right side. Therefore, usually the gap on the right side will be bigger than the left side.

BOTTOM BAR

• Due to design of bottom bar, there’s a gap between the fabric and the bottom bar.
• The size gap will be around 0.2 inch. So, when the blinds are fully lowered, light can come through the gap.

QnA

NOTE

• We recommend to read all instructions carefully before starting use the Motorized blind.
• Please refrain from any operations other than the recommended usage.

Motor

• Q. Can I control the blinds with the remote control while the motor is charging?
  • A. It is not recommended to use it during charging. Please use the remote control and blinds after charging is complete.
• Q. The motor suddenly stopped.
  • A. If the motor is stopped due to strong force, it may take about 10 minutes to recover.
  • After that, it should be operational again.
• Q. I have installed the blinds. Can I use them right away?
  • A. The motor is generally pre-charged, but we recommend fully charging it before use.

Remote Controller

• Q. The blue LED light on the remote control flickered about 3 times. What does that mean?
  • A. If the blue light flickers about 3 times, it indicates that it is currently unavailable. Try using it again after a while. When configuring the remote control settings, proceed step by step by pressing the remote control buttons. If you want to get more detailed information, please read the Remote controller instruction which enclosed in package.
• Q. What is the difference between ONE-TIME TOUCH and CONSTANT TOUCH?
  • A. One-Time touch is raising and lowering the blinds one step at a time by pressing the remote control ↑,↓ buttons. In the case of Constant touch, pressing the remote control ↑,↓ buttons makes the blinds to go all the way down or all the way up automatically.
• Q. Is speed adjustable?
  • A. Yes, you can select speeds of 25 / 30 / 35 rpm. For larger blinds, it is recommended to set the speed to 25 rpm due to the weight.

CLEANING GUIDES

1. DO NOT WASH
2. DO NOT USE CHEMICAL
3. DO NOT IRON

How to remove stain

• Use soft brush to remove dust. Please do not use any wet equipment to clean the shade.
• Do not dry the fabric in direct sunlight.

Recommended Installation Location

• For Indoor
• Home, Office, Café, Restaurant, etc.,
• We recommend installing it in a place with low humidity.

OTHER REFERENCES

How to measure inside mount video guidelines

• [ Amazon US ]
  • https://www.amazon.com/vdp/0494ffecfb2b420fa99a58afa0250e81?
• [ Amazon CA ]
  • https://www.amazon.ca/vdp/0ba807b3b7bd474286bfc5133f1fbab0

How to measure outside mount video guidelines

• [ Amazon US ]
  • https://www.amazon.com/vdp/013b2c01b14a451895e7579501db95b8?
• [ Amazon CA ]
  • https://www.amazon.ca/vdp/0868eaf99c05419f8c6801e4eec2be82

References

• Amazon Sign-In
• How To Measure For Outside Mount(DO1)
• How To Measure For Inside Mount(DI1)
• Amazon Live - How To Measure for Outside Mount Shades and Blinds (B0104)
• Amazon Live - How To Measure for Inside Mount Shades and Blinds (B0104)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>