Foiresoft Cordless Custom Zebra Roller Shades and Blinds User Manual

Foiresoft Cordless Custom Zebra Roller Shades and Blinds

Specifications

Brand: Forest

Product: Cordless Zebra Roller Blinds

Warranty: 6 months limited warranty

Dimensions

• Outer diameter : 30mm
• Inner diameter : 28mm
• Thickness : 1mm

Product Usage Instructions

Installation

Installing Tips

• Ensure blinds are fully rolled up for easier installation.
• Confirm the front and back sides of the header before installing.
• Check for a flat surface to install the blinds beautifully.
• Verify all components are included. Contact us for replacements if any parts are missing.

Steps

1. Marking the bracket location: Ensure it won’t interfere with other components.
2. Installing the C-Clamp: Follow the provided picture for the correct direction.
3. Installing the blinds: Note the rounded edge on the front part of the header.

Ceiling Mount Installation

Detailed instructions for ceiling mount installation can be found in the user manual.

Wall Mount Installation

Detailed instructions for wall mount installation can be found in the user manual.

Precautions for Using

Opening and Closing the Blinds

To open or close the blinds, place the handle at the center of the bottom bar and raise or lower slowly.

Adjusting Spring Tension

Notes

• The shade is operated by the spring tensioner located on the center pole.
• The spring tension may need adjustment due to long-term use or external factors like humidity and heat.
• The spring tensioner is on the right when viewed from the front.

FAQ

• Q: What is covered under the product warranty?
  • A: The warranty covers wrong type, color, size, package damage, missing accessories, and manufacturing defects.
• Q: How can I request replacements for defective products?
  • A : For issues mentioned above, provide the order number, product size, and pictures to request replacements.
• Q: What is not covered under the warranty?
  • A : Normal wear and tear, damage due to abuse, accidents, misuse, alterations, and failure to follow installation or maintenance instructions are not covered.

Foiresoft provides a limited warranty service for 6 months after the date of purchase. The support we provide under the limited warranty is only available for manufacturing defects (i.e, material defects, workmanship that cause product failure to operate).

What is covered?

• Wrong Type, Color, and Size
• Package Damaged
• Missing Accessories
• All internal mechanisms
• Repairs and/or replacements will be provided with the closest equivalent of the product

NOTE : For the issues mentioned above (wrong type, color, size, and damaged/defective product), order number, product size and pictures must be provided.

What is NOT covered?

• Normal wear and tear

  • Abuse
  • Misuse
    

• Any failure that caused by :
  

  •   * Accidents

  • Alterations

• Defectives that were caused by the passing of time :

  • Discoloration
  • Fading
  • Shrinking
  • Stretching

• Failure to follow our instructions regarding :

  • Measurement
  • Installation
  • Cleaning
  • Maintenance

GETTING STARTED

• INCLUDED COMPONENTS

Additional (sold separately)

TOOLS YOU MAY NEED

PARTS NAME

1. Side Cover
2. Roller Tube
3. Support Spring
4. Spring Tensioner
5. Top Header
6. Shade Fabric
7. Bottom Rail End Cap
8. Bottom Roller Plug
9. Bottom Roller
10. Bottom Bar
11. Handle

PARTS DIMENSIONS

HOW TO INSTALL

• INSTALLING TIPS
  • Make sure the blinds are fully rolled up to ease the installation.
  • Confirm the direction of the header’s front side and back side before installing.
  • Check the space for check if the surface is flat to ensure that the blinds will be able to be installed beautifully.
  • Check the components included are all complete. If you are missing some parts, please reach out to us for replacement.

Marking the bracket location

Before marking the bracket location, please make sure that the location for the bracket installment won’t interfere with other components including the blind’s header.

Installing the C-Clamp direction

Please refer to the explanation picture for checking the right C-Clamp direction for installment.

Installing the blinds

The front part of our header has rounded edge. Please make sure the installment directions.

Preparation

Ceiling Mount

PRECAUTIONS FOR USING

OPENING AND CLOSING THE BLINDS

• Place the handle on the exact center of the bottom bar and slowly raise or lower the blind.
• If the handle is not located in the center of the bottom bar or if the blind goes up and down quickly, both ends of the blind fabric may he damaged or tilted to one side

ADJUSTING SPRING TENSION

NOTES

• Our shade is operated by the spring tensioner that is located on the center pole.
• The spring may be loosened or tightened depending on the long use of the blind or the external environment such as humidity and heat.
• The spring tensioner is on the right when viewed from the front

Due to working mechanism, there’s a size gap between the fabric and the header. The total size gap will be around 1.5 inches and the fabric usually will be off-centered because the spring tension device parts are all on the right side. Therefore, usually, the gap on the right side will be bigger than the left side.

If you’d like to adjust the fabric location to the center, you can open the blind fully and slowly close it while shaking the fabric left to right. If this doesn’t work in one try, please do the adjustment repeatedly.

TELESCOPIC DRAW ROD

NOTES : The telescopic draw rod is not included on the package. It has to be purchased separately.

Dimensions

CLEANING GUIDES

1. DO NOT WASH
2. DO NOT USE CHEMICAL
3. DO NOT IRON

How to remove the stain

Use soft brush to remove dust. Please do not use any wet equipment to clean the shade.
Use a hair dryer on cold mode or soft brush to remove dust and use neutral detergent for stain spot cleaning.
Do not dry the fabric in direct sunlight.

OTHER REFERENCES

How to measure inside mount video guidelines

• [ Amazon US ]
  • https://www.amazon.com/vdp/0494ffecfb2b420fa99a58afa0250e812
• [Amazon.CA ]
  • https://www.amazon.ca/vdp/0ba807b3b7bd474286bfc5133f1fbab0

How to measure outside mount video guidelines

• [ Amazon US ]
  • https://www.amazon.com/vdp/013b2c01b14a451895e7579501db95b8?
• [ Amazon CA ]
  • https://www.amazon.ca/vdp/0868eaf99c05419f8c6801e4eec2be82

CONTACT INFORMATION

Foiresoft Customer Service

• URL : https://www.amazon.com/askseller?sellerlD=ASRGLZI3|TAPZ
• Email : contact.foiresoft@gmail.com

References

• Amazon.CA
• How To Measure For Outside Mount(DO1)
• How To Measure For Inside Mount(DI1)
• Amazon Sign-In
• Amazon Live - How To Measure for Outside Mount Shades and Blinds (B0104)
• Amazon Live - How To Measure for Inside Mount Shades and Blinds (B0104)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>