VEVOR YHEO-1 Lab Distillation Apparatus User Manual
- June 1, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty Certificate
www.vevor.com/support
LAB DISTILLATION APPARATUS
USER MANUAL
MODEL:YHEO-1
YHEO-1 Lab Distillation Apparatus
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear safety goggles and duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the Lab Distillation Apparatus.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions
- DO NOT SIT OR STAND ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacities.
- Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Lab Distillation Apparatus.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
PARTS LIST
Thank you very much for choosing this model.Glass fittings should always be handled with care. Please read all of the instructions before using it.The information will help you achieve the best possible results.
| Parts name | Number of parts | Description |
|---|---|---|
| Two-necked flat bottom flask | 1 | 2000ml |
| Opposite mouth flask | 1 | 2000ml |
| Coil condenser | 1 | 24/40 ground glass joint |
| Conical flask | 1 | 150ml |
| Gas guide tube | 1 | 24/40 ground glass joint,40/38 ground glass joint |
| Glass stopper | 2 | 24/40 |
| Separatory funnel | 1 | 24/40 ground glass joint,100ml |
| beaker | 1 | 150ml |
| Glue head dropper | 2 | Red glue head |
| thermometer | 1 | 200℃ |
| Thermometer adapter | 1 | 24/40 ground glass joint |
| Latex tubing | 1 | 692000mm |
| Vacuum grease | 1 | Vaseline |
| Flask brush | 1 | Big size |
| Electronic hot plate | 1 | 1500W |
| Essential oil bottle | 2 | 30mlbrown bottle |
| Iron support stand | 1 | With 60cm supporting pole |
| Plastic clip | 3 | 2 of 24/40,1 of 40/38 |
| Cross clamp | 2 | / |
| Flask clamp | 2 | / |
| Circular ring | 1 | 7.3cm |
OPERATION
-
Place the Two-necked flat bottom flask on the electronic hot plate;
-
Fix the flask with a flask clamp;
-
Install the opposite mouth flask;
-
Install the gas guide tube and fix it with a plastic clip;
-
Install the coil condenser and fix it with a claw clamp;
-
Install the separatory funnel and fix it with a plastic clip;
-
Install the thermometer adapter and the thermometer at the branch of the two-necked flat bottom flask.
PRODUCT PARAMETER
| Model | YHEO-1 |
|---|---|
| Power | 1500W |
| Voltage | AC 120V ,60HZ |
| Region | AMERICA |
RECOVERY AND DISPOSAL
This product complies with the provisions of the European Directive
2012/19/EC. The symbol marked with a crossed out wheelie bin indicates that
this product requires separate recycling in the EU. The same is true for
products and all accessories marked with this symbol. Products marked as such
must not be disposed of with normal household waste, but must be taken to a
collection point for the recycling of electrical and electronic equipment.
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd.
Suite 250,9166 Anaheim Place, Rancho Cucamonga, CA 91730
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China Technical Support and E-Warranty Certificate
www.vevor.com/support