XLINE GPB365 Power Bank User Manual

June 2, 2024
XLINE

POWER BANK
**GPB365***

XLINE GPB365 Power Bank

Operating Manual & Warranty Terms
*denotes the colour of the device

CONDITIONS OF SAFETY AND HAZARDS

  1. Do not turn on or charge adamaged device.
  2. Do not interfere with the interiorof the device and change itsstructure.
  3. The device must be protectedagainst shocks, vibrations, rapidtemperature fluctuations andexcessive moisture and dust.
  4. Do not immerse the device in water nor in other liquids.
  5. The device should be charged ina well-ventilated room only.
  6. When charging the device – itmust not heat up to a temperatureof about 40°C, avoid contact of thedevice with other objects.
  7. The charging of the device shouldtake place in the temperature range of 15-25°C.
  8. Protect the device from hotsurfaces and open flames as thereis a risk of explosion.
  9. Keep children away from thedevice.
  10. Do not leave the device unattendedwhile charging.
  11. If the casing of the device deformsthe device begins to leak, or thecapacity is significantly reducedstop using the device immediatelyand dispose of it in an appropriateway.

FOREWORD

Thank you for the trust you have placed in us when you purchased your Xline device.
We are convinced that this high quality device will provide you with a lot of joy and satisfaction during its use.

PLEASE CAREFULLY READ AND FOLLOW THE OPERATING MANUAL!
This device is intended for domestic or other non-commercial use.
The manufacturer will not be held liable for damages resulting from improper or non-compliant use.

TECHNICAL DATA

Model GPB365*
Battery Lithium Polymer,

11.1V/10000mAh/
111Wh (30000mAh)
Housing| ABS
Input
USB-C1, USB-C2:| 5V  3A,
9V  3A,
12V 3A,
15V 3A,
20V 3.25A
(PD 65W Max)
Output
USB-C1, USB-C2:|  5V 3A,
9V 3A,
12V 3A,
15V 3A,
20V 3.25A
(PD 65W Max)
Output
USB-A1, USB-A2| 4.5V 5A,
5V 4.5A,
5V  3A,
9V 2A,
12V 1.5A
(22.5W Max).
Outputs
USB-C1+USB-C2:|  5V 3A, 15W Max
Dimensions| 1587040mm
Accessories| Power bank, USB-A – USB-C cable, manual
Weight| 640 g

PRODUCT DESCRIPTION

  1. USB-A2
  2. USB-A1
  3. USB-C2
  4. USB-C1
  5. Battery level and charge indicator
  6. Charge indicator button

TIPS AND INFORMATION

  • The power bank is a portable charger with a rechargeable battery ready for use when connected to the device.
  • When charging the devices, there is a natural loss of energy of the power bank battery.
  • The performance of the battery is influenced by factors such as the ambient temperature, the cable used, or the condition of the battery.
  • The capacity of the power bank is marked with a mAh unit and is the total sum of the capacities of all cells contained in the device.
  • After deducting all losses, the power bank is able to transfer 65% of the stored battery energy.
  • Thermal protection: the device has a sensor that, once excessive temperature is detected, will disconnect the current flow. In thiscase, allow the power bank to cool before restarting.
  • Surge protection, short-circuit protection: the device will automatically switch off if the battery is charged with voltage and current parameters inconsistent with those specified on its rating plate.

KEEPING THE BATTERY IN GOOD CONDITION

  • Discharge and recharge the power bank at least once every 3 weeks. This will keep the battery in good condition. If the power bank is constantly charged and never discharged, this can cause rapid battery degradation.
  • If the power bank will not be used for a long time, it should be charged in advance and stored in a cool, dry and safe place. Short charging cycles should not be used, as they shorten the lifespan of the battery.
  • Do not allow or try to start the device if the battery is completely discharged – this may result in damage to the battery.
  • Protect the device from shocks and high temperatures. Do not open the housing or alter the design of the device

CHARGING THE POWER BANK BATTERY

PLEASE NOTE! THE DEVICE SHOULD BE CHARGED IN A WELL-VENTILATED ROOM WITHIN THE TEMPERATURE RANGE OF 15-25°C.

  1. Press the button and check the battery level, if the level is low, charge the battery.
  2. The device should be charged using mains or car chargers with voltage and input current parameters indicated on the device nameplate.
  3. Use the included USB-A to USB-C cable.
  4. Connect the USB-C plug to one of the USB-C ports of the device, and plug the USB-A plug into the charger port.
  5. The charge indicator will flash and indicate the battery level of the device.
  6. The green LED will light up to indicate that the battery is charging quickly.
  7. The battery of the device will be fully charged when all the LEDs of the indicator light up constantly.

CHARGING EXTERNAL DEVICES

PLEASE NOTE! THE DEVICE SHOULD BE CHARGED IN A WELL-VENTILATED ROOM IN THE TEMPERATURE RANGE OF 15-25°C. THE DEVICE HEATS UP DURING OPERATION AND SHOULD NOT BE CHARGED AND DISCHARGED, IN  PARTICULAR WHEN CARRYING THE DEVICE IN BAGS, BACKPACKS, POCKETS OR STORING IT IN CLOSED DRAWERS AND OTHER PLACES WHERE THE DISSIPATION OF ACCUMULATED HEAT IS IMPOSSIBLE OR DIFFICULT.
OPERATION OF THE DEVICE IN SUCH CONDITIONS MAY RESULT IN ITS OVERHEATING AND DAMAGE, WHICH MAY RESULT IN DAMAGE TO PROPERTY OR PERSONAL INJURY OF USERS AND BYSTANDERS.

  1. Make sure the battery of the power bank is not fully discharged. If the charge level is low, charge the power bank battery beforehand.
  2. Using the included USB-A – USB-C cable, connect the external device.
  3. Plug the USB-A plug into one of the power bank USB-A ports and the other plug into the USB-C or micro USB charging port of the external device.
  4. The power bank charge indicator will indicate the current battery level.
  5. The green indicator indicates that the external device is charging quickly

The charging speed of external devices depends on the cable used, the charging capacity of the device, the temperature of the environment. After connecting several charging devices, the power bank will charge devices with a total power of 15W.
Laptop computers should be charged using the USB-C output.

INDICATOR MESSAGES

The 4 LED indicator indicates the current battery level.
The green indicator indicates that the external device or power bank battery is charging quickly.
PLEASE NOTE! IF, AFTER PRESSING THE BUTTON, ONLY ONE OF THE INDICATOR LEDS FLASHES, THE BATTERY LEVEL IS BELOW 5%, THE BATTERY NEEDS TO BE RECHARGED.

Battery status indicator 1 LED 2 LED 3 LED 4 LED
Remaining battery level 0%-5% 26%-50% 51%-75% 76%-100%

STORAGE

Store the device in a dry, safe place at a temperature of 15-25°C, away from children.

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION
The power bank does not charge. Surge, short- circuit or thermal protection
has tripped. The device should be charged in accordance with the  voltage and

current parameters given on the rating plate.
The power bank does not  charge external devices.| The battery is discharged.| Charge the power bank battery.
The cable has been connected incorrectly.| Connect the charging cable according to section „Charging  external devices.”
Plugs are not correctly inserted into  ports.| Make sure that the plugs are correctly inserted into the  power bank ports and the charging device.

ECO-FRIENDLY AND ENVIRONMENTALLY FRIENDLY DISPOSAL

This device is marked, in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE), with the symbol of a crossed-out waste container:

Do not dispose of the device marked with this symbol together with household waste.
For disposal return the device to your local waste treatment and disposal facility or contact your local authorities.

DISPOSAL OF WASTE BATTERIES
In accordance with the EU Directive 2006/66/EC, as amended, on batteries, this product is marked with the symbol of a crossed out waste bin.
The symbol indicates that the batteries or rechargeable batteries used in this product should not be disposed of together with normal household waste.
Users of batteries and rechargeable batteries must use the available collection network for these elements, which allows them to be returned, recycled and disposed of.

Li-Pol

YOU CAN HELP PROTECT THE ENVIRONMENT!
Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.

WARRANTY CONDITIONSFOR POWER BANK

  1. ART-DOM Sp. z o.o. with its registered office in Łódź (92-402) at ul.
    Zakładowa 90/92 National Court Register Number 0000354059 (Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from the causes inherent in the item sold (manufacturing defects).

  2. A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the authorized service or point of sale.

  3. In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.

  4. The warranty period for the user is 24 months from the date of delivery of the goods.

  5. The goods are intended for use only in the conditions of an individual household.

  6. The present warranty does not cover:
    a. damage caused by using the device in a manner inconsistent with the user manual,
    b. mechanical, chemical or thermal damage,
    c. repairs and modifications made by companies or persons that were not authorized to do so by the manufacturer,
    d. parts that are easily worn or consumables such as: batteries, bulbs, fuses, filters, knobs, shelves, accessories,
    e. installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction.

  7. The Guarantor will select the mode of defect removal at its own discretion.
    Removal of a confirmed defect of the device will take place through warranty repair or replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may perform replacements when the buyer  requests repair, if bringing the goods (device) into conformity in accordance with the granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor. In particularly justified cases, if both repair  and replacement are impossible or would require excessive costs for the Guarantor, the Guarantor may refuse to bring the goods into compliance with the granted warranty and propose another way to settle the warranty claim.

  8. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized service point, if it offers such service (replacement).
    The returned device must be complete, without mechanical damage. Failure to comply with these conditions may result in failure to accept the warranty claim.

  9. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on the part and at the expense of the seller, and the warranty does not affect these legal protection measures.

  10. The warranty is valid in Poland.

  11. The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the goods in accordance with the information contained in the user manual.

CAUTION: damage or removal of the rating plate from the device may result in warranty being deemed void.

We are constantly improving our products, so they may differ slightly from the imagespresented on the packaging and in the user manual. Pleas read the user manualbefore operating the device.

ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź. National Court Register
number 0000354059.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals