SwitchBot Curtain Rod Automated Smart Curtain Rod 2 User Manual
- June 12, 2024
- SwitchBot
Table of Contents
SwitchBot Curtain
User Manual (Rod)
In the Box
Device Instruction
Preparation
- A smartphone or tablet with Bluetooth 4.2 or above
- Download the SwitchBot app
- Create a SwitchBot account and sign in
- Charge Curtain for about 4 hours
- (Optional) If you intend to use the Cloud Service feature, you need to set a SwitchBot Hub Mini (sold separately) up and connect your phone to the internet
|
---|---
https://apps.apple.com/cn/app/switchbot/id1087374760|
https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot
&hl=en
Installation
Check your curtain rail Before you get started with the installation
procedure, we would like to remind you that the supported measurements for
rod-type curtains are as follows,
In case
your curtain rail does not work well with SwitchBot Curtain (Rod), please do
not hesitate to seek for assistance at
[email protected]
Step 1: Add Curtain in the app
Create a SwitchBot account and sign in from the app’s Profile page. Then add
Curtain to your account. Learn more at support.switch-bot.com/hcien-
us/articles/360060778713
Step 2: Install on Your Curtain Track
Retrofitting is simple with SwitchBot Curtain. It only takes a few seconds to
make your existing curtains smart. It is straightforward and intuitive with
our app instruction.
Adjust The Parts
When the Top Lid is connected to the Hook Arms, press down and hold the Button
and slide the Top Lid up to the top position of the Hook Arms.
Important Tips on Telescopic Extendable Rod
If you are using an extendable curtain rod, Curtain may
not move smoothly or even get stuck at the joining point of the rod during
calibration. Before you move on, please make sure you draw your curtain to the
thicker end of the rod. And you must install Curtain on the thicker end of the
rod as well.
Ring Top Curtains
Close the curtain. Then place the Curtain onto the rod between the first and
the second ring behind the panel.
Compress the space between the Top Lid and the Motor using both of your hands
until Curtain is firmly attached. (Warning: over-compressing may break the
Hook.)
Installation complete. The
Curtain should be hidden behind the panel.![SwitchBot Curtain Rod Automated
Smart Curtain Rod 2 - second ranning]](https://manuals.plus/wp-
content/uploads/2023/06/SwitchBot-Curtain-Rod-Automated-Smart-Curtain-Rod-2
-second-ranning.jpg)
Grommet Curtains
Close the curtain. Then place the Curtain onto the rod between the first and
the second grommet behind the panel. Compress the space between the Top Lid
and the Motor using both of your hands until Curtain is firmly attached.
(Warning: over-compressing may break the Hook.) Installation complete. The
Curtain should be hidden behind the panel. Tab Top Curtains
Grab the Clips provided in the box.
Attach a Clip on the first
tab.
Attach Clips on every other tab.
All other Clips
should be attached the opposite way against the first Clip. Make sure all
Clips are sitting on the top of the rod and are aligned with each other. From
the second Clip, the tail of one Clip should be able to touch the head of the
next Clip.
Place the Curtain onto the rod between the first and the second tab behind the
panel.
Compress the space between the Top
Lid and the Motor using both of your hands until Curtain is firmly attached.
(Warning: over-compressing may break the Hook.)
Installation complete. The Curtain should be hidden behind the
panel.
Back Tab Curtains
Grab the Clips provided in the box.
Attach a Clip on the first
tab.
Attach Clips on every other tab. All other Clips should be attached the
opposite way against the first Clip. Make sure all Clips are sitting on the
top of the rod and are aligned with each other. From the second Clip, the tail
of one Clip should be able to touch the head of the next Clip.
Place the Curtain onto the rod between the first and the second tab behind the
panel.
Compress the space between the Top Lid and the Motor using both of your hands
until Curtain is firmly attached. (Warning: over-compressing may break the
Hook.)
Installation complete. The Curtain should be hidden behind the panel.
Grommet Curtains (Alternative)
This is an alternative method for Grommet Curtains when regular method does
not work well. It requires more Clips and a special plastic Strip which can be
purchased from us.
Close the curtain and make sure the distances between each fold line are
approximately equal. Straigthen the Strip and align the first hole with one
outer fold line. Count the number of holes between two outer fold lines and
take note of this number. You need to determine how many Clips you need. Count
the number of inner fold lines on the curtain panel. You need one Clip on each
inner fold line.
Grab the Clips provided in the box.
Attach a Clip to the end of the Strip. Insert the gap on the Strip into the
Clip head and flip it over. In previous steps, you have counted the number of
holes between two outer fold lines. Use this number to determine the next
position on the Strip that you are to attach a Clip. Attach all the Clips on
the Strip.
Install one Clip onto every inner fold line of the curtain panel. Keep the
Strip straightened when you install the Clips.
When you install all the Clips onto the curtain, try open and close it and
make sure the Strip is straightened when closed. You can cut the rest of the
Strip off or hide it behind the curtain.
Place the Curtain onto the rod between the first and the second grommet behind
the panel.
Compress the space between the Top Lid and the Motor using both of your hands
until Curtain is firmly attached.
(Warning: over-compressing may break the Hook.)
Installation complete. The Curtain should be hidden behind the panel.
Install the Clip (Optional)
If you use double side curtain, you need two SwitchBot urtains to open it
from the middle. Alternatively, you can use the auxiliary Clip we provide to
turn it into asingle side curtain so that you only need one SwitchBot Curtain.
To do that, fully close the curtain so the 2 panels are closest to each other.
Connect the upper parts of the two panels by using the Clip. Draw the curtain
back and forth to make sure the two panels move as one. Then you can refer to
Step 2: Install on Your Curtain Track on how to set the Curtain up.
Step 3: Calibration
Calibration is for your Curtain to adapt to your existing curtain track. You
need to calibrate before you can control it from your phone or every time you
change the Open Mode in the app. You can also redo the calibration on
Curtain’s Settings page.
Dealing with Telescopic Extendable Rod
If Curtain cannot move smoothly on the rod or it gets stuck at the connecting
point during calibration, we have provided a Rod Connector to help fix the
problems. Rod Connector is a flexible aluminum plate covered with a tape that
is used to smoothen the slope between two connecting rods. Please follow these
steps to install, Move Curtain to the thicker end of the rod, preferably a few
centimeters away from the connecting point.
Remove the adhesive protection cloth from Rod Connector.
Stick one end of Rod Connector to the curtain rod, as shown in the graph. Wrap
Rod Connector around the rod slowly while applying pressure to each segment of
the metal plate against the thinner end of the rod.
Rod Connector should be firmly adhered to the connecting section of the rod.
Resume to the app and redo the calibration. Curtain should be able to move
through the rod without getting stuck.
If you continue to encounter problems, please reach us at
[email protected]
Control
Lots of convenient ways to control, at your will.
App Control
Open and close the curtain at your fingertip. We offer intuitive App control
for iOS and Android, with weekly/bi-weekly updates following feedback from
you. OTA firmware update is also available for better user experience.
Touch & Go
Even with SwitchBot Curtain, you’d probably still instinctively draw the
curtains by hand sometimes. When it senses you drawing the curtain, the
SwitchBot Curtain will kick in and do the work for you. We call this Touch &
Go. **Voice Control and Home Automation***
Smart living is powered by your voice commands. Wouldn’t it be great to just
say it?
“Alexa, close the curtain.” “OK Google, close my bedroom curtain.” “Hey Siri,
open the living room curtain.”
- Require SwitchBot Hub Mini (sold separately).
Control with SwitchBot Remote (Sold Separately)
A wireless remote add-on for you to place anywhere.
Touch & Go
Even with SwitchBot Curtain, you’d probably still instinctively draw the curtains by hand sometimes. When it senses you drawing the curtain by more than 5 cm, the SwitchBot Curtain will kick in and do the work for you.
For double side curtain, drawing on one side of curtain will trigger both Curtains to open or close simultaneously.
“Touch & Go” is turned on by default. To turn off, go to “Advanced Settings”, and turn off “Touch & Go”. 5 cm is the best threshold we tested because it lowers the possibility of false trigger by your cats and dogs.
Voice Control and Home Automation
You can link multiple third-party services to your SwitchBot account and control Curtain or scenes using voice commands. You must meet the following requirements in order to achieve voice control and automation, – Connect your phone or tablet to the Internet – Set a SwitchBot Hub Mini up (sold separately) – Enable Cloud Service on Curtain’s Settings page – Link third- party services to your SwitchBot account
Alexa, close the curtain.
OK Google, close my bedroom curtain.
Hey Sin, open the living room curtain.
SwitchBot Scene
You can set up SwitchBot Scene for home automation within the SwitchBot eco-
system when you turn on the Cloud Service within the Settings. There are
unlimited possibilities.
Control with SwitchBot Remote (Sold Separately)
You can control Curtain using a SwitchBot Remote. There are two buttons on
Remote and you can set an action for each of them from the app. Please refer
to Remote’s user manual for more information.
Settings
Navigate to Curtain’s detail page and settings page for a variety of features
such as Light Sensing (Beta), Delay, Schedule, Motion Mode, and more.
Light Sensing (Beta)
The light sensing feature allows you to set automations based on the
illuminance level or the relative intensity of sunlight. It’s still in the
beta stage and is being upgraded continuously, so please explore the details
in the latest app release.
Delay
You can set up 1 Delay for countdown action. You can set the countdown time,
percentage of opening or closing, and Motion Mode.
Schedule
You can set up 5 Schedules on board, or unlimited Schedules with a Hub. You
can set the day, time, percentage of opening or closing, and Motion Mode.
Motion Mode
Performance Mode gives Curtain more power to move, which results in higher
noise level. This mode is good for daily uses. Silent Mode gives Curtain less
power to move, which results in lower noise level. The best use case for this
mode would be when you wake up with sunshine. Move up to 8 kg / 17 pounds of
curtain.
Charging, Firmware and Factory Reset
Charging
It takes about 10 hours’ to fully charge the battery and the battery lasts 8
months after a full charge’. You may also purchase our Solar Panel to charge
by sunlight3.
- 5V=1A adapter is required to charge with adapter.
- Battery life is tested under condition of runway of 3 meters, loaded with 8 kg of curtain, opened and closed twice a day, 25°C. Battery life may vary given different condition.
- Illuminance Level 6 is required to charge with Solar Panel.
Firmware
Please make sure you have the up to date firmware by upgrading in time.
Factory Reset
Long press the button for 15 seconds until the LED light lights up. Then
release the button. If you are using double side curtain, you will need to
redo the calibration on both Curtains.
Caution: You may lose all the settings after Factory Reset and you may
need to add the device again and redo the calibration.
Specification
Model Number: W0701600 Color: White / Black Material: ABS plastic with UV- Resistant coating Product Size (Main Body): 42mm x 51mm x 110mm Product Net Weight (Main Body): 135g Power: Battery-powered, Type-C, DC 5V= 1A. Battery lasts up to 8 months after a full charge or unlimited with Solar Panel. Connectivity: Bluetooth 5.0 Long Range Sensor: Accelerometer, light sensor Strength: Up to 8 kg / 17 pounds of curtain (test results from controlled experiments in our lab) Max Runway: 3 meters Mode: Silent Mode / Performance Mode Timer: Up to 5. Or unlimited with a Hub’ Voice Control (Hub Required): Amazon Alexa, Google Assistant, Siri Shortcuts, SmartThings, IFTTT, and LINE Clova
- Solar Panel is sold separately.
- Battery life is tested under condition of runway of 3 meters, loaded with 8 kg of curtain, opened and closed twice a day, 25°C. Battery life may vary given different condition.
- Hub is sold separately.
Note: Use under regular temperature only.
Return and Refund Policy
This product has one-year warranty (start from the purchasing day). The situations below do not fit the Return and Refund Policy.
- Intended damage or abuse.
- Inappropriate storage (drop down or soaking in water).
- User modify or repair.
- Using loss.
- Force majeure damage (Natural disasters).
The batteries are not in the warranty.
Contact and Support
Setup and Troubleshooting: support.switch-bot.com
Support Email: [email protected]
Feedback: If you have any concern or problem when using our products, please
kindly send feedback from the Profile > Feedback page in the SwitchBot app.
CE Warning
Manufacturer’s Name: Woan Technology (Shenzhen) Co., Ltd. Sample Description: SwitchBot Curtain Trade Mark: SwitchBot Model number: W0701600 Operating Temperature: -20°C-60°C This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the device, including the antenna. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/Eu. All essential radio test suites have been carried out.
- CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- The device complies with RF specifications when the device used at 20cm from your body.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
KCC Warning
?_!1PLE-2-42-1 fl: Woan Technology (Shenzhen) Co., Ltd. zimg/s.c:
gr?g–.gre-1 FTL4J7171(q-dcilolEig.dA1±141§17-d7171)/ W0701600 Woan
Technology (Shenzhen) Co., Ltd. /China xil V: 2020.06 R-R-Woa-W0701600 of
gdm?JcilIblisliEArg-9-1.gd
NCC
Documents / Resources
|
SwitchBot Curtain Rod Automated Smart Curtain Rod
2
[pdf] User Manual
Curtain Rod Automated Smart Curtain Rod 2, Curtain Rod, Automated Smart
Curtain Rod 2, Smart Curtain Rod 2, Curtain Rod 2
---|---