transliteglobal TL-9802 COAXIAL ETHERNET BRIDGE User Manual
- June 5, 2024
- transliteglobal
Table of Contents
transliteglobal TL-9802 COAXIAL ETHERNET BRIDGE
DISCLAIMER
No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error or damage of any kind resulting from the use of this document.
COPY WARNING
This document includes some confidential information. Its usage is limited to the owners of the product that it is relevant to. It cannot be copied, modified, or translated in another language without prior written authorization from TRANSLITE GLOBAL LLC.
PRODUCT OVERVIEW
TL-9802 is a coaxial ethernet bridge that uses the G.hn technology and allows you to get data rates up to 2Gbps* over coaxial cable lines and IPTV transmission. It provides an affordable solution by making use of the existing coaxial cables that are already installed throughout many homes and businesses, to create a high-performance network connection that is both secure and reliable. It enables you to connect various multimedia devices like smart TV, consoles, computers, printers, etc., simultaneously to the network without interference for a seamless high-speed connection for streaming in HD, online gaming, downloading large files and much more. The data is kept highly secure and reliable with the 128-bit Advanced Encryption Standard (AES) encryption. A maximum of 16 devices can be connected in a network group.
KEY FEATURES
- Delivers high-speed Internet access through your existing coaxial wires.
- G.hn-compliant, ITU-T G.9960-compliant
- Up to 2Gbps (PHY rate) ultra-high-speed coaxial network
- Features 2 * GbE port
- Optional (for operators):
- TR-069/TR-181 remote management – QoS support
- G.hn, ITU-T G.9960/9961/9962/9963/9964 compliant
- G.hn frequency band: 2-200MHz*
- PHY rate: up to 2Gbps
- Support for home networking connectivity
- G.hn LED1, Ethernet LED1, PWR LED*1
- RJ-45 GbE Port (Yellow) * 2
- Coaxial 75ohm F-type connector * 2
- One F-type connector for TV pass-through
- Diplexers (LP&HP) can be customized.
- (For satellite /TV signals frequency, it can be tuned up to 3GHz upon request.)
SPECIFICATIONS
General Information
Model No.| TL-9802 G.hn over coax Ethernet Bridge
Main Function
| G.hn Coaxial Bridge GbE LAN port * 2
F-type connector* 2
LP + HP diplexer Built-in
Product Size| 130 x 80 x 25 mm
Features
Main chipset| 88LX5153
Installation| Desk-top
Adaptor
Plug type
| AC/DC Adaptor DC Jack in
LAN Standards
| IEEE 802.3i (10 BASE-T), IEEE 802.3u (100 BASE-TX), IEEE 802.3ab (1000
BASE-T)
LAN port| 2 X GbE (Pantone Color: 114c or 109c)
Coaxial Connector| F-type
Input voltage| DC 12 V / 1A
---|---
Frequency Band
| G.hn Coaxial 200MHz
Hi-Pass Filter: 258 ~ 2000MHz
PLC protocol
| G.hn ITU-T G.9960 G.hn ITU-T G.9961 G.hn ITU-T G.9962 G.hn ITU-T G.9963 G.hn ITU-T G.9964
ITU-T G.9972
MAC Access Methods|
CSMA/CA, TDMA and CSMA
Group/Pairing| Press and hold pairing button for 3 seconds to enter into pairing mode
Un-pair: press and hold pairing button for 5 seconds to un-pair
RESET| Press and hold for 10 seconds
LED| Power, G.hn, Ethernet
HGF| Compliant
MTBF| System: 300,000hrs (follow “Telcordia SR-322 Issue 3”)
Lifetime| Over 10,000 hours
HW SGMII interface| Auto
Access Methods| CSMA/CA, TDMA medium access protocols
Modulation| 1024/512/256/128/64/32/16/ 8-QAM, QPSK, BPSK
Max. devices in a networking Group|
16 for HN
Encryption| AES 128-bit encryption
IGMP Snooping| Supports IPv4 IGMP snooping and Ipv6 MLD.
TR-069| N/ A
Mechanical
Color| White
Adaptor| AC/DC Adaptor DC Jack in (DC12V/1A)
2.5mm
Pair button| X1
RESET button| X1
Giga RJ45 port| 2-port
RJ 45 port| X2
LED| (Power, G.hn, Ethernet)
LED symbol| Power, G.hn, Ethernet
Housing print
| 1. G.hn-Link
2. TV
3. Reset
4. GETH-2
5. GETH-1
6. Power
7. Pair
Regulation
FCC, ICES report| Compliant
CE-EMC, CE-LVD
report
| Compliant
ROHS| Compliant
WEEE| Compliant
HGF| Compliant
Temperature| Operating: -10 ~ 40°C Storage: -20 ~ 70°C
Relative Humidity| Operating: 10~85% Non-Condensing
Storage: 5~90% Non-Condensing
HARDWARE INSTALLATION
Step 1: Plug a Coaxial Bridge into an AC outlet using the AC adapter
provided. Use a coaxial cable to connect its F-connector to a wall’s coaxial
connector. Then use an Ethernet cable to connect the Bridge to a router or
modem.
Step 2: Plug another Coaxial Bridge into another AC outlet using the AC
adapter provided. Use a coaxial cable to connect its F-connector to the wall’s
coaxial connector. Then use an Ethernet cable to connect it to any network
device such as a streaming box, smart TV, or gaming console.
PAIRING TWO BRIDGES
Users can easily create a G.hn network—simply press the Pairing buttons on the Bridges in the proper order to “pair” them together. To set up the network, follow the steps below
Step 1: Verify the Power LED initial state on both Bridges is solid
green. The G.hn Link LED is off when a TL-9802 Coaxial Bridge does not have a
secured link to a G.hn network.
Step 2: Press and hold the Pairing button on Bridge A for 3 seconds
(refer to the image above) until its G.hn Link LED starts blinking amber.
Step 3: Press and hold the Pairing button on Bridge B for 3 seconds until
its G.hn Link LED starts blinking amber.
Step 4: When a Bridge has paired to a network, its G.hn Link LED will be
solid amber.
Note: The G.hn LED of Bridge A will continue to blink for approx. 120
seconds. During that time, you may add more bridges to the network by
repeating Steps 1–4 above.
UNPAIRING/REMOVING A DEVICE FROM THE G.hn NETWORK
Step 1: Press and hold the Reset button (inside the pinhole) of the unit
for 5 seconds until all its LEDs turn off for 0.5 seconds and then turn back
on.
Step 2: The G.hn Link LED will then blink once in amber, then turn off.
APPENDIX
LED BEHAVIOUR
PUSH-BUTTON BEHAVIOUR
Buttons
Security| The pairing of two units to establish a network
Step 1: Initial state Power LED is solid green.
Step 2: Press and hold the Pair Button (3 secs) of unit A until the Power LED starts blinking in Amber.
Step 3: Press and hold the Pair Button (3 secs) of unit B until the Power LED starts blinking in Amber.
Step 4:
The Power LED of the two units should be solid Amber. Note:
The Power LED of unit A shall continue to blink for ~120 seconds. During that time, it is possible to add more new devices to the
network by repeating steps 3 and step 4.
Reset
(inside the needle pinhole)
| Removing a device from a secured network (Un-Pairing)
Step 1: Press and hold the Reset Button (pinhole) of the unit for 10 seconds until all LEDs blink once. (Turn off for 1 second and then turn it on)
Step 2: The Power LED of the unit should be solid green and the G.hn
link LEDs should be off. (May take 2 seconds after the above blink)
For Support
- North America: support@transliteglobal.com
- Asia: support@translite.co.in
- Rest Of The World: support@transliteglobal.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>