IKT True Wireless Earbuds Instruction Manual
- June 9, 2024
- IKT
Table of Contents
IKT True Wireless Earbuds
Connect
-
Take out the earbuds (Earbuds auto power on)
-
After open the phone Bluetooth, Click the jo1 to Pairing
Reset
If earbuds has any connection or function problems, please reset the earbuds
- Delete the BT pairing information on the phone.
- Put the earbuds into the charging case to charge.
- Take out the earbuds and wait for 20 seconds.
(If the above operation does not work, please try again)
Operation
Play /Pause|
---|---
Switch Song|
Adjust Volume|
Power on/off （When no connected）|
Answer/Hang up|
Reject Call|
Voice Assistant|
X1: Click Once
X2: Click 2 times
2S: Press and hold for 2 seconds
Problem handling
① Can be connected but there is no sound: Click the right earbuds to
increase the volume.
② One of earbuds cannot be charge: Clean the charging contact of the
earbuds and the charging case.
③ One of the earbuds cannot be connected: Reset the earbuds.
If the earbuds cannot be charged, please activate the warranty and contact us
to send a new product.
Please clean the charging contacts of the earbuds and charging case frequently to avoid charging failures.
Safety Instructions
- Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
- Avoid liquid immersion into the product.
- Do not disassemble the product.
- Do not use concentrated chemical products or detergents to clean the product.
- Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
- Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.
evetimester Consulting GmbH Bettina str. 30,60325 Frankfurt am Main, Germany Contact@evatmaster.com
EVATOST CONSULTING LTD Suite 11, First Floor, Moy Road, Business Centre, Tiffs Well, Cardiff, Wales, Cells 7QR Contact@evatmaster.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>