Foiresoft Cordless Custom Roller Blinds User Manual

Foiresoft Cordless Custom Roller Blinds

Product Information

• Specifications
  • Product Name: Cordless Solar Roller Blinds
  • Warranty: 6 months from the date of purchase
• Product Warranty
  • Included Components
  • Parts Name
  • How to Install
  • Precautions for Using
  • Adjusting Spring Tension
  • Adjusting the Fabric
  • Telescopic Draw Rod
  • Other References
• Product Warranty
  • Foiresoft provides a limited warranty service for 6 months after the date of purchase.
  • The warranty covers manufacturing defects such as material defects and workmanship that cause product failure to operate.
  • The warranty includes wrong type, color, and size, package damage, missing accessories, and all internal mechanisms.
  • Repairs and replacements will be provided with the closest equivalent of the product. To claim warranty service, the order number, product size, and pictures must be provided.
• Contact Information
  • Foiresoft Customer Service:
  • URL: www.amazon.com/hz/help/contact/ASRGLZI3ITAPZ.
  • Email: [email protected].
• Included Components
  • The amount of included components may differ depending on the size of the shades. The following components are included:
  • Blind Shade
  • L-bracket x 2 EA
  • C-clamp x 2 EA
  • Additional components are sold separately. The shape of the telescopic draw rod may vary depending on the product.
• Parts Name and Dimensions
  • Side Cover
  • Roller Tube (Outer diameter: 38mm, Inner diameter: 37mm)
  • Gearbox Module
  • Top Header (Thickness: 1mm, Height: 80mm)
  • Bottom Rail End Cap
  • Bottom Bar (Height: 73mm)
• How to Install
  • Installing Tips:
  • Make sure the blinds are fully rolled up to ease the installation.
  • Confirm the direction of the header’s front side and back side before installing.
  • Check if the surface is flat to ensure that the blinds will be able to be installed beautifully.
  • Check that all the included components are complete. If any parts are missing, please contact us for replacement.
  • Marking the Bracket Location:
  • Before marking the bracket location, ensure that it won’t interfere with other components, including the blind’s header.Refer to page 4 for bracket dimensions.
  • Installing the C-Clamp Direction:
  • Refer to the explanation picture to check the correct C-Clamp direction for installation. The front part of the C-Clamp should be facing outward.
• Installing the Blinds:
  • Install the front of the header with the flat side forward so that the color is visible. Follow the installation directions provided.
• Precautions for Using
  • Ensure that the blinds are fully rolled up before adjusting the spring tension or fabric. Avoid excessive force when adjusting to prevent damage to the blinds.
• Adjusting Spring Tension
  • To adjust the spring tension, follow these steps:
  • Locate the spring tension adjustment mechanism.
  • Using a screwdriver, turn the adjustment screw clockwise to increase tension or counterclockwise to decrease tension.
  • Test the tension by rolling and unrolling the blinds. Repeat the adjustment if necessary.
• Adjusting the Fabric
  • To adjust the fabric, follow these steps:
  • Hold the fabric on both sides near the bottom.
  • Gently pull or push the fabric to adjust its position.
  • Release the fabric and check if it is aligned properly. Repeat the adjustment if necessary.
• Telescopic Draw Rod
  • The telescopic draw rod is used to operate the blinds. Depending on the product you purchased, the shape of the draw rod may vary. Refer to the product-specific instructions for proper usage.
• Other References
  • For any other information or references, please consult the additional documentation provided with your product.
• FAQ (Frequently Asked Questions)
  • Q: What does the warranty cover?
  • A: The warranty covers wrong type, color, and size, package damage, missing accessories, and all internal mechanisms.
  • Q: What is not covered by the warranty?
  • A: The warranty does not cover normal wear and tear, abuse, accidents, defects caused by the passing of time (discoloration, fading), failure to follow instructions regarding measurement and installation, misuse, alterations, shrinking, stretching, cleaning, and maintenance.

PRODUCT WARRANTY

• Foiresoft provides a limited warranty service for 6 months after the date of purchase.
• The support we provide under the limited warranty is only available for manufacturing defects (i.e, material defects, workmanship that cause product failure to operate).

What is covered?

• Wrong Type, Color, and Size
• Package Damaged
• Missing Accessories
• All internal mechanisms
• Repairs and/or replacements will be provided with the closest equivalent of the product

NOTE: For the issues mentioned above (wrong type, color, size, and damaged/defective product), order number, product size, and pictures must be provided.

What is NOT covered?

• Normal wear and tear
  • Abuse
  • Misuse
• Any failure caused by:
  • Accidents
  • Alterations
• Defectives that were caused
  • Discoloration
  • Shrinking
• bypassing of time:
  • Fading
  • Stretching
• Failure to follow our
  • Measurement
  • Cleaning
• instructions regarding:
  • Installation
  • Maintenance

GETTING STARTED

INCLUDED COMPONENTS

Additional (sold separately)

Depending on the product you purchased, the shape may vary.

TOOLS YOU MAY NEED

TOOLS YOU MAY NEED (NOT INCLUDED)

PARTS NAME

1. Side Cover
2. Roller Tube
3. Gearbox Module
4. Top Header
5. Bottom Rail End Cap
6. Bottom Bar

PARTS DIMENSIONS

HOW TO INSTALL

INSTALLING TIPS

• Make sure the blinds are fully rolled up to ease the installation.
• Confirm the direction of the header’s front side and back side before installing.
• Check the space to check if the surface is flat to ensure that the blinds will be able to be installed beautifully.
• Check the components included are all complete. If you are missing some parts, please reach out to us for replacement.

Marking the bracket location

• Before marking the bracket location, please make sure that the location for the bracket installment won’t interfere with other components including the blind’s header. (Refer to page 4 for bracket dimensions.)

Installing the C-Clamp direction

• Please refer to the explanation picture for checking the right C-Clamp direction for installment.

Installing the blinds

Install the front of the header with a flat side forward so that the color is visible. Please make sure the installment directions.

Preparation

Ceiling Mount

Wall Mount

ADJUSTING SPRING TENSION

NOTES

• The spring may be loosenes or tightened depending on the long use of the blind or the external environment such as humidity and heat.
• The spring tensioner is on the left when viewed from the front

Type of Trouble

• Case 1
  • Shortage of tension
  • When the fabric released out and falling down automatically.
• Case 2
  • Over Tension
  • When the fabric rolled up itself and kept pulling the bottom bar and came into the cassette automatically.
• Case 3
  • The Fabric released out & hanging
  • It happens when the bottom bar turns over the fabric by over tensions of spring. Blinds move up & down, however, the bottom bar will not go up to the top positions.

Troubleshooting solutions

1. Place the labeled side of the product facing the floor, as shown in the image.
2. Carefully remove the left and right side cover and roll the fabric all the way around.
3. Please be careful not to turn to the opposite side.
   • Case 1: 2 round turns
   • Case 2: 0 turns (Just release spring tensions)
   • Case 3: 1 round turns
4. After turning, close the side cover with the cover and fabric tube well connected to assemble.

ADJUSTING THE FABRIC

Due to the working mechanism, there’s a size gap between the fabric and the header.The total size gap will be around 0.6 inch.

If you’d like to adjust the fabric location to the center, you can open the blind fully and slowly close it while shaking the fabric from left to right. If this doesn’t work in one try, please adjust repeatedly.

TELESCOPIC DRAW ROD

NOTES: The telescopic draw rod is not included in the package. It has to be purchased separately.

Dimensions

Lowering the blind

Raising the blind

CLEANING GUIDES

1. DO NOT WASH
2. DO NOT USE CHEMICAL
3. DO NOT IRON

How to remove stain

• Use a soft brush to remove dust.
• Please do not use any wet equipment to clean the shade.
• Use a hair dryer on cold mode or a soft brush to remove dust and use neutral detergent for stain spot cleaning.
• Do not dry the fabric in direct sunlight.

OTHER REFERENCES

How to measure inside mount video guidelines

• [ Amazon US ]
  • https://www.amazon.com/vdp/0494ffecfb2b420fa99a58afa0250e81?
• [ Amazon CA ]
  • https://www.amazon.ca/vdp/0ba807b3b7bd474286bfc5133f1fbab0.

How to measure outside mount video guidelines

• [ Amazon US ]
  • https://www.amazon.com/vdp/013b2c01b14a451895e7579501db95b8?
• [ Amazon CA ]
  • https://www.amazon.ca/vdp/0868eaf99c05419f8c6801e4eec2be82.

CONTACT INFORMATION

Foiresoft Customer Service:

• URL: www.amazon.com/hz/help/contact/ASRGLZI3ITAPZ.
• Email: [email protected].

References

• Amazon Sign-In
• How To Measure For Outside Mount(DO1)
• How To Measure For Inside Mount(DI1)
• Amazon Live - How To Measure for Outside Mount Shades and Blinds (B0104)
• Amazon Live - How To Measure for Inside Mount Shades and Blinds (B0104)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>