JL AUDIO C6-650cw 6.5 Inch 2-Way Component Woofer Owner’s Manual
- June 2, 2024
- JL AUDIO
Table of Contents
JL AUDIO C6-650cw 6.5 Inch 2-Way Component Woofer
Specifications
- Component: 6.50 in / 165 mm Woofer
- Power Handling: 30 – 100 W
- Frequency Response: 52.8 Hz
- Sensitivity: 87.37 dB @ 1W/1m, 93.37 dB @ 1W/0.5m, 90.37 dB @ 2.83V/1m
- Impedance: 4 ohms
- Mounting Depth: 2.60 in / 66 mm
- Weight: 3.21 lbs / 1.46 kg
- Dimensions: 6.50 in / 165 mm (diameter), 1.00 in / 25 mm (depth)
Product Usage Instructions
- Ensure the mounting location is suitable for the speaker’s dimensions and depth.
- Use the provided hardware for secure installation.
Wiring
- Connect the speaker wires to the appropriate terminals on the speaker and the audio system following the polarity markings (+/-).
Power Handling
- Operate the speaker within the recommended power range of 30 – 100 W to avoid damage.
Listening
- Listen to your audio system at levels appropriate for operating conditions and hearing safety to prevent hearing damage.
FAQ
Q: What is the recommended power range for this speaker?
A: The speaker is designed to handle power between 30 - 100 W.
Q: How should I wire the speaker to my audio system?
A: Connect the speaker wires to the terminals with matching polarity markings (+/-) on both the speaker and the audio system.
Q: What is the impedance of this speaker?
A: The speaker has an impedance of 4 ohms.
IMPORTANT
- Installation requires appropriate tools and safety equipment. Professional installation is recommended.
- Before installation, turn off the audio system and disconnect the battery system from the audio system.
- Before cutting or drilling, check for potential obstacles behind mounting surfaces.
- Do not mount this product in an engine compartment or other area of extreme heat.
- Mount this product securely to prevent damage or injury in severe conditions.
WARNING: Listen to your audio system at levels appropriate for operating conditions and hearing safety.
Dimensions
What in the box
- Passive crossover networks are not included, as C6 drivers are designed for active systems. For optimum performance, we strongly recommend the use of a high-quality DSP and a dedicated amplifier channel.
- Product images shown are for illustrative purposes only and may differ from the actual product. Due to continuous product development, all specifications are subject to change without notice.
Optional
C6 2-WAY SPEAKER SYSTEM
- These are recommended starting points for tuning.
- In-vehicle measurements should be made to optimize the crossover for speaker placement and vehicle acoustics.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>