MEMPHIS AUDIO SBT1 Bluetooth Streaming Device Instructions
- October 27, 2023
- MEMPHIS AUDIO
Table of Contents
MEMPHIS AUDIO SBT1 Bluetooth Streaming Device
INSTRUCTIONS
- Connect Bluetooth receiver’s RCA terminal to amplifier RCA AUX input.
- Wire ground to the negative terminal of your 12v battery
- Wire positive to ignition lead. SBT1 will turn off when the ignition is off
- Turn on Bluetooth in the settings of your desired streaming device
- Select device “Memphis Amplifier”
- If prompted, enter the following four-digit passcode: 0000 (this is a one-time step required for setup)
- Begin streaming your music!
SBT1
Bluetooth Streaming Device Marine Grade Construction BLUETOOTH
800.489.2300
www.memphiscaraudio.com 122 Gayoso Ave.
Memphis,TN, USA
References
Read User Manual Online (PDF format)
Loading......