SUNCO LIGHTING 03319 LED PL Hybrid Lamps Owner’s Manual
- June 9, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING 03319 LED PL Hybrid Lamps Owner’s Manual
FEATURES
Simple rewiring installation allows lamps to run on the main or use it with a magnetic ballast as a plug and go.
DIRECT WIRE OR PLUG & GO™
- Exceptional eff icacy
- Universal voltage using direct wire
- For use on 5w-9w CFL G23 2-pin magnetic ballasts*
APPLICATION
Replaces CFL PL lamps with G23/2 Pin base frequently used in downlights and
sconces.
*Not suitable for use with emergency exits or lighting.
Specifications
ELECTRICAL
Wattage | 4.5W |
---|---|
Voltage | 120-277V |
Current | 4OmA |
LIGHTING PERFORMANCE
Lumens | 450 |
---|---|
Lumens Per Watt (LPW) | 100 |
Color Temperature (ccer) | 3000K |
Color Rendering (CRP | 83 |
Beam Angle | 180° |
Dimmable Lighting Control |
ENVIRONMENT
Operating Temperature | -4° —113°F |
---|---|
Suitable Location | DAMP |
Ingress Protection Rating | IP20 |
Fixture TypeOpen | Open |
LIFESPAN
Average Life (Hours) | 50,000 |
---|---|
Warranty (Years) | 5 |
COMPONENTS
LED Light Source: N/A
CONSTRUCTION
Housing | Aluminum / PC |
---|---|
Lens | Frosted |
Base / Power Supply | G23 2 Pin / Plug in |
Finish | White |
QUALIFICATIONS
Published lumens on LED products are approximate and may vary slightly.
Specifications are subject to change without notice.
DIMENSIONS (Inches)
Length (ma) | 6.5″ |
---|---|
Width/Diameter (moo) | 1.3″ |
Height | 0.8″ |
Weight (Lbs) | — |
SUPPORTING DOCUMENTS (Grey = not available at this time.)
Product Sheet | View |
---|---|
Install Instructions | View |
PACKAGING
PACKAGING | UPC | DIMENSIONS (LxWxH) | GROSS WEIGHT (fibs) | |
---|---|---|---|---|
Master Carton | 20 | 10854432004412 | 17.7″ x 8.9″ x 6.7″ | 13.2 |
Individual Box | 1 | 854432004415 | 6.9″ x1.5″ x 1″ | 0.7 |
Country of Origin | China | |||
HS Tariff | 8539.50.0010 |
ORDERING
ITEM# | DESCRIPTION | CASE |
---|---|---|
03319 | LED 4.5WPL/HYBRID/30K/180°/FR/120 277V/G23 2 PIN | 20 |
ADDITIONAL INFORMATION:
Family Item(s): 13319/4000K 23319/5000K
*Note: If the CFL ballast does not operate the lamp, the ballast is probably weak or failing and should be removed, and the socket re-wired for line voltage per lamp installation instructions.
It was originally thought this lamp was suitable for totally enclosed fixtures. After live aging and further evaluation, it has been determined excessive heat may cause the lamp not to function properly. Therefore it is not recommended to be used in totally enclosed fixtures.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>