DEDEMAN 50iPlay6000-U Televizor LED Smart Allview User Manual
- June 9, 2024
- DEDEMAN
Table of Contents
DEDEMAN 50iPlay6000-U Televizor LED Smart Allview
IMPORTANT
Please read this manual carefully before installing and operating the TV.
Keep this manual handy for further reference.
Safety Information
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating in the literature accompanying the appliance.
Warning
The lightning flash with arrowhead symbol within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Important Safety Precautions
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched particularly at Plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments /accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used caution when moving the cart/apparatus combination to avoid injury tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time. Caution:
-
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
-
The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
-
The socket-out shall be installed near the equipment and shall be easily accessible.
-
This product should never be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacture’s instructions have been adhered to.
-
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus.
-
Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
-
Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
-
Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times. -
The USB terminal should be loaded with 0.5A under normal operation.
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. unless you are qualified to do so. -
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
-
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth
-
The maximum using environment temperature is 45 degrees.
The Maximum using altitude is 2000 meters
TV Buttons and Terminal Interface
TV Buttons
Note: The following is only functional schematic, And the actual position
and arrangement of different models may be different.
One key:
Seven keys:
| Turn ON/OFF Power.
---|---
SOURCE/| External Signal Input Selection.
MENU / OK| Display Main MENU And Confirm MENU Item Selection.
CH+/-| Selecting Channel.
VOL+/-| Adjusting Volume.
Terminal Interface
Note: The following are the various terminal interface, the actual position and arrangement, the number of different models may be different.
| AV input
External AV Signal Input| | USB input
Connect a USB device here to play its media files or to record programs via
the PVR function.
---|---|---|---
| HDMI input
Digital signal input from HDMI video connector.| | OPTICAL output
Connect the SPDIF receiver.
| ANT75
Connect the antennal/cadle tv input (75NHF/UHF)| | RJ45
Connect the Internet.
Do not touch or be close to the HDMI, USB terminals, and prevent electrostatic discharge to disturb these terminals while in USB operation mode, or it will cause the TV to stop working or abnormal status.
External device connection diagram
TV Install and Connect
Set your TV
To put your TV on a firm place which can bear the weight of the TV.
To avoid danger, please don’t positions the TV near water or heating place
(such as light, candle, heating machine),do not block the ventilation at the
back of TV.
Connect antenna and power
- Connect the antenna cable to the antenna socket on the back of the TV.
- To plug the power cord of TV (AC 100- 240V- 50/60Hz). Turn on TV
- Connect the power supply, enter the standby mode (red light), press the power button of the TV or the power button on the remote control to turn on the TV
Note: If the model has a Cl card slot on its top, a silicone plug for the Cl card slot can be found in the accessory bag (for models without Cl card slot, there is no such silicone plug), please insert the silicone plug into the slot when the Cl card is not in use.
Note: Picture for reference purposes only.
TV Stand Installation Instructions
- Open the carton and remove the TV and scattered accessories and base (some models without base).
- ln order to avoid damaging the TV, please cover it with soft mattress, put it on the table, face down on the soft material and screw the neck of the base to the TV.
- screw the base and connected to the TV.
- the installation is complete.
Note:
Picture for reference purposes only.
Please prevail in kind
First Time Installation
First Time Installation
-
Please according to the Text Tip to First Time Setup.
Press / button to select Language.
-
Please make sure the device has connected,
then press / / [ ◄ ] / [ ►] button to select the primary input source
HOME
HOME
Press button, you can enter HOME screen.
- You can always view the current time at the top of the Home screen.
- If your TV is connected to the Internet through a wireless connection or an Ethernet cable, then the icon will be displayed at the top corner of the screen.
- Manage apps
- Select the item you want to move. then press the button to manage.
INPUT
Input
Press / button to select Inputs menu.
Press / / (◄] / ( ►] button to select.
Press ENTER to select input.
Initial Setup
Picture
Press (MENU] to enter the main menu, press / to select picture menu.
- Press / button to select the option that you want to adjust in the PICTURE menu.
- Press Enter button to adjust.
- After finishing your adjustment, Press Enter button to save and return to the previous menu
Picture Mode
Press / button to select Picture Mode, then press / &Enter button to select.
(Optional: Standard/Cinema day/Cinema night/Dynamic/Sports).
Aspect Ratio
Adjust the Aspect Ratio to stretch or zoom in on your picture.
Press / button to select Aspect Ratio.
Press ◄ I ► button to select Automatic/16:9/4:3/Panoramic/Movie Zoom/Direct.
Game Mode
Press / to select, and press ( ◄] / (► ] to select On/Off.
Picture Mode Settings
Press / to select. and press ( ► ] & ENTER to enter.
Sound
Press MENU button to display the main menu. Press / button to select SOUND in
the main menu,
- Press / button to select the option that you want to adjust in the SOUND menu.
- Press Enter button to adjust.
- After finishing your adjustment, Press Enter button to save and return to the previous menu.
Speakers
Press / button to select Speakers.
Press ENTER/ ( ►] button to enter sub-menu
Audio Output
Press / button to select Speakers and enter, then press / button to select BT
Sound Bar/ARC/TV Speaker/SPDIF Only
Network
Press MENU button to display the main menu. Press / button to select Network
in the main menu
Press / button to select :Network Configuration/Internet Connection/Bluetooth/
Wake on Wireless Network/Wake on LAN.
Channel
Press MENU button to display the main menu. Press ( ◄] / (►] button to select
Channel.
- Press / button to select the option that you want to adjust in the Channel menu
- Press Enter button to adjust.
- After finishing your adjustment, Press Enter button to save and return to the previous menu.
Accessibility
Press MENU button to display the main menu.
Press ( ◄] / ( ►] button to select Accessibility in the main menu.
System
System
Press MENU button to display the main menu.
Press [ ◄) / [►) button to select System in the main menu
- Press / button to select the option that you want to adjust in the System menu.
- Press Enter button to adjust.
- After finishing your adjustment, Press Enter button to save and return to the previous menu.
Application Settings
Press / button to select Application Settings
HDMI/CEC Function
Press / button to select CEC Function, then press Enter button to enter sub-
menu to select.
Press / button to select CEC Control/Device Auto Power On/Device Auto Power
Off/TV Auto Power On/CEC Device Lists.
Note: All the Options are available only when the CEC Control select On.
Advanced Settings
Press (T] / (A] button to select Advanced Settings, then press ENTER/ ( ►
button to enter
Support
Press / button to select Support. then press ENTER ( ►] button to enter
Restore To Factory Default
Press / button to select Restore To Factory Default, then press ENTER [ ►]
button to enter sub-menu and select.
Media
Media
Press / / [ ◄ ] / [ ►] button to select Media on the Home page or press MEDIA
button on the remote. and press OK button to enter enter the Media Center.
Video
Press / button to select Video or All, and press / /( ◄ ]/( ►] button to
select Movies. Press Menu button to display the setting options on the left
side.
Audio
Press / button to select Audio or All, and press / / ( ◄ ]/ (►] button to
select Music.
Image
Press / button to select Image or All. and press / / ( ◄] / ( ►] button to
select Picture.
Help
No power| * Check if the AC cord of TV is plugged in or not. If there’s still
no power, please disconnect the plug, and reconnect to the socket after 60
seconds. Turn the power back on.
---|---
Signal not received properly| e Double or phantom images may appear on your TV
if there are high buildings or mountains close to where you are. You can
adjust the image thru manual operation: consult instruction of vernier
regulation, or adjust the direction of the external antenna.
• If you use an indoor antenna, signal reception may be more difficult under certain circumstances. Adjust the direction of the antenna for optimum reception. If this does not improve reception, you may have to switch to an external antenna.
No picture| • Check if the antenna at the back of the TV is connected properly.
• View other channels to see if the problem still occurs.
Video appears with no audio| • Try increasing the volume.
• Check if the TV’s sound is on mute or not.
Audio is present, but video does not appear or is discolored| e Try adjusting
the contrast and brightness.
Static noise affects video and audio quality| • Check if the antenna at the
back of the TV is connected properly.
Broken lines on screen| • Electrical appliances such as hair dryers or
vacuums etc. may be interfering with your TV set. Switch these appliances off.
Remote doesn’t work|
• Make sure the plastic bag which came with the remote control is removed. Try using the remote in a shorter distance from the TV. Check if the placement of the batteries is correct, or try using new batteries with the remote control.
• The TV will go into Standby mode if it receives no response in a few minutes.
No video (PC mode)| ^ Please check if the cable is connected to the HDMI port
correctly, or if the cable is bent in some places.
Screen is too bright or dark (PC Mode)| • Adjust the brightness or contrast
in the main menu.
No response from the PC| • Check if the PC’s display resolution is set to a
compatible resolution for the TV.
Lines appearing when a device is connected to the RCA port| • Make sure you
are using a cable in good quality.
Problems are unresolved| ^ Unplug the power cable and wait for 30 seconds,
then reconnect to the socket. If problems still persist, do not attempt to
repair the TV by yourself. Kindly contact the service center.
Do not leave your TV displaying a static image, whether it is from a paused video, menu screen, etc. for an extended period of lime, doing so will damage the display and may cause image burn-in.
Remote Control
- POWER: Switches the TV between on and standby mode.
- No effect.
- MUTE: Mute or restore your TV sound.
- 0-9: Figures “0-9” are used to directly input channel number.
- FREE: Connects to FREE.
- Deezer: Connects to deezer.
- inputs: Display/Select signal source options.
- VOL+/-:Press to increase/ decrease the sound level.
- CH+/-:Press to scan through channels.
- INFO: Displays the present channel information such as the current time and channel name.
- BROWSER: Connects to BROWSER.
- MEDIA: Connects to MEDIA
- Navigation buttons: Cursor UP/LEFT/RIGHT/DOWN .
- BACK: Press to move back through menus.
- EXIT:Exitthe OSD menu.
- HOME:Displays the home screen.
- NETFLIX: Connects to NETFLIX for viewing online TV shows and films (internet connection required).
- YouTube: Connects to YouTube (internet connection required).
- Prime video : Connects to Prime video (internet connection required}.
- PLEX:Connects to PLEX.
- COLOR BUTTONS:There are related functions under EPG.
- SUBT: SUBT.
- EPG : EPG menu.
- Media control:Play / Pause
- CH.LIST:Channel list
- TXT: Press to enter Teletext when play the program.
- App customization: App customization (long press under the home page)
- Menu: Displays the OSD (On Screen Display) menu.
EU DECLARATION OF CONFORMITY
We, S.C. Visual Fan S.A., with the headquarters in Brasov, 61, Brazilor
Street, 500313, Romania, registered at the Trade Commerce Brasov under no.
J08/818/2002, CUI RO14724950, as the manufacturer, assure, guarantee and
declare on our own responsibility, according to the provisions from article 4
HG no. 325/2017, regarding the regime of the products and services, which can
be harmful for life and health, that the product 50iPlay6000-U from ALLVIEW,
does not jeopardize the life, health and labor protection, does not produce a
negative impact over the environment and is in accordance with:
Directive (EU) 2015/863 of 31 March 2015 amending Annex II to Directive
2011/65/EU of the European Parliament and of the Council as regards the usage
restrictions of certain dangerous substances in electric and electronic
equipment;
-
Directive regarding the radio equipment RED 2014/53/EU;
-
Directive regarding the electromagnetic compatibility EMC 2014/30/EU;
-
The safety requests of the European Directive 2014/53/EU and the EN 62368- 1:2014+A11:2017 standards, regarding the level of decibels emitted by the sold appliances.
The product has been assessed according to the following standards: -
Health and safety: EN 62368-1:2020+A11:2020 ; EN IEC 62311: 2020; EN 50665: 2017;
-
EMC EN 55032: 2015+A11: 2020, EN 55035: 2017+A11: 2020; EN IEC 61000-3-2: 2019+A1: 2021, EN 61000-3-3:2013+A1:2019; ETSI EN 301 489
-
1 V2.2.3: 2019, ETSI EN 301 489-17 V3.2.4: 2020
-
Radio spectrum: ETSI EN 300328 V2.2.2: 2019; ETSI EN 303 340 V1.2.1 ; ETSI EN 303 372 -2 V 1.1.1: 2021
The evaluation procedure of the conformity was made according to Directive 2014/53/EU, the documentation being stored at S.C. Visual Fan S.A., Brasov, 61, Brazilor Street, 500313, Romania and will be offered at request.
The product has the CE mark on it. The declaration of conformity is available
at www.allviewmobile.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>