bryton Gardia R300L Rearview Radar and Tail Light User Guide

June 9, 2024
bryton

Gardia R300L Rearview Radar and Tail Light
User Guidebryton Gardia R300L Rearview Radar and Tail
Light REARVIEW RADAR AND TAIL LIGHT
R300L

Charge The Device

bryton Gardia R300L Rearview Radar and Tail Light - fig
1 Power ON / OFFbryton Gardia
R300L Rearview Radar and Tail Light - fig 2 Pair With Bike Computerbryton Gardia R300L Rearview Radar and
Tail Light - fig 3

Install the Device

bryton Gardia R300L Rearview Radar and Tail Light - fig
4 bryton Gardia R300L Rearview Radar
and Tail Light - fig 5Gardia App

UPDATE FIRMWARE

  1. Download the Bryton Gardia app from the App Store or Google Play or scan the QR code to locate the app
    http://download.brytonsport.com/

  2. Power on the Gardia R300L and pair with the app.

  3. An update notice will appear when new firmware is detected.

  4. Press OK to confirm the update operation.

LIGHT OPERATION

Manual Mode with Smart Control
Manual Mode
TURN ON / OFF: Press and hold the top button for 1 second to turn on / off.
SWITCH LIGHTS: Single press to change light modes.

bryton Gardia R300L Rearview Radar and Tail Light - fig
6 Smart Control
Warning Light: There are 2 warning light patterns. When a vehicle is detected by the Gardia radar, based on the level of threats, the light will automatically switch to the suitable warning light continuously to bring the cyclist to the attention of the oncoming driver.
Brake Light: When deceleration is detected, the light will illuminate for 2.5 seconds to notify approaching drivers/cyclists.
Low Battery Light: When the battery drops below 15%, the light will automatically dim and enter low-power mode. This will extend the battery life.
Sleep Mode
When the Gardia R300L is inactive for more than 5 minutes without connecting to the app or bike computers, it will enter sleep mode to conserve battery life and save the light mode used before entering sleep. Once the light detects motion, it will return to the previous light mode.

POWER/LINK INDICATOR LED

POWER INDICATOR LED

Battery Status
Slowly
Flashing Green| 5 0 % to 100% battery life remains
Slowly
Flashing Yellow| 15% to 50% battery life remains.
Slowly
Flashing Red| Below 15% battery life remains. Low battery mode
will be activated automatically
Charging Status
Flashing Green| Still Charging
Solid Green| Fully Charged
LINK INDICATOR LED
Slowly
Flashing Blue| The device is in smart mode and can be controlled
by a paired app or compatible Bryton device

PAIR WITH COMPATIBLE BIKE COMPUTER

HOW TO PAIR
To pair the Gardia R300L with compatible bike computers, power on the radar and cycle through to SENSORS > + on bike computers to enable pairing. Once paired, the indicator LED will flash blue. This indicator light informs users that the Gardia R300L has been successfully paired with the compatible bike computer.
DISPLAY ON BIKE COMPUTER AND GARDIA APP

  1. Approaching vehicles from up to 190m behind the user.
  2. Warning icons change as the vehicle approaches.
  3. Color change based on level of threat.

bryton Gardia R300L Rearview Radar and Tail Light - fig
7

SPECIFICATIONS

Item Description
Dimensions Dimensions
Weight 66 g
 Tech Spec 24GHz Radar Range
Water Rating IPX7
Connectivity 2.4GHz ANT+/BLE
Viewing Range Up to1.6 km
Viewing Angle 220°

NOTE: Visit the product page for full specifications.

GETTING THE USER MANUAL

Go to the website address below https://www.brytonsport.com/#/supportResult?tag=Manual or scan the QR code to locate the Gardia R300L user manual.https://www.brytonsport.com/#/supportResult?tag=Manual

WARNING

This device, the Bryton Gardia R300L, is intended to be an additional aid in riding and is not a substitute for maintaining situational awareness. Always be aware of your surroundings and do not operate this device while in motion, stare at or become distracted by the display. Improper usage of this device could result in serious injury or death. Sustained contact with bright lights could damage your eyes. Please refrain from staring at the light at close range or for long periods of time. Use this device at your own risk.

RF Exposure Information (MPE)
This device meets the EU requirements and the International Commission on Non- Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. To comply with the RF exposure requirements, this equipment must be operated in a minimum of 20 cm separation distance to the user.
Hereby, Bryton Inc. declares that the radio equipment type Bryton product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.brytonsport.com/download/Docs/CeDocs_GardiaR300L.pdf

CCAH22LPA540T8
FCC: YDM-DE2201
201-220464
Designed by Bryton Inc.
Copyright 2023 Bryton Inc. All rights reserved.
The content of this manual is subject to change without prior notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals