Simply Retrofits 100W LED Area-Parking Light Instruction Manual
- June 10, 2024
- Simply Retrofits
Table of Contents
Slim LED Area Light (Dimmable),
120-277VAC/200-480VAC
INSTALLATION INSTRUCTION MANUAL
Introduction
This LED Flood light uses the latest in solid state lighting technology for
long life, low maintenance, and high efficiency.
There are Multiple installation methods, suitable for various occasion.
Warning: To avoid the risk of fire, explosion, or electric shock, this
product should be installed, inspected, and maintained by a qualified
electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:
Be certain electrical power is OFF before and during installation and
maintenance.
Luminaire must be connected to a wiring system with an equipment-grounding
conductor.
To avoid explosion:
Make sure the supply voltage is the same as the rated luminaire voltage.
Do not install where the marked operating temperatures exceed the ignition
temperature of the hazardous atmosphere.
Do not operate in ambient temperatures above those indicated on the luminaire
nameplate.
Keep lens tightly closed when in operation.
For supply connections use wire rated for at least 90°C
After installation, please
check whether the lighting fixture is firmly fixed.
check whether wires are connected correctly.
At last, turn on the power, and check if the lighting fixture works well. If
not, please turn off the power and contact with local dealer.
EA/PD (Small straight arm)
Circular pole mounting(installation)
Square pole mounting(installation)
Wiring solution 1
www.simplyretrofits.com
Documents / Resources
|
Simply Retrofits 100W LED Area-Parking
Light
[pdf] Instruction Manual
100W LED Area-Parking Light, 100W, LED Area-Parking Light, Area-Parking Light,
Parking Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>