AUDIBAX DSP8 Professional Active Speaker with DSP Altavoz User Manual

: June 12, 2024
: AUDIBAX

Table of Contents

AUDIBAX DSP8 Professional Active Speaker with DSP Altavoz
Product Information
Product Usage Instructions
DATA SHEET
SAFETY INSTRUCTIONS
- GENERAL INFORMATION
FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY
PRODUCT DESCRIPTION
FACILITIES
DSP FUNCTIONS
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AUDIBAX DSP8 Professional Active Speaker with DSP Altavoz

AUDIBAX- DSP8- Professional -Active- Speaker -with -DSP- Altavoz - PRODUCT
IMAGE

Product Information

Brand: Audibax
Product Name: DSP8 / DSP10 / DSP12 / DSP15 – ID: 10242049 / 10198308 / 10242050 / 10198306 – EAN: 7427244399753 / 7427244396721 / 7427244399760 / 7427244396714
Category: Audio Active Speakers
DSP control: Yes – Design: Standard / Floor monitor / wall monitor / Live / Vocal boost – Woofers: 8″ / 12″ / 10″ / 15″
Number of Woofers: 1
Number of ways: 2
RMS power: 150W / 200W / 180W / 300W
Peak Power: 450W / 1200W / 450W / 1500W
Impedance: 8 ohms
Monitor Slope: Yes
Number of simultaneous entries: 1 / 2
Bluetooth: Yes
Color: Black
Height: 42.5 cm / 61 cm / 51 cm / 68 cm
Width: 25.5 cm / 35 cm / 30 cm / 42 cm
Depth: 25 cm / 34.8 cm / 29 cm / 38 cm
Weight: 8 Kg / 15.75 Kg / 10 Kg / 20.65 Kg

Product Usage Instructions

Safety Instructions:

Ensure that the power outlet matches the specifications of the equipment.
If the equipment has a voltage selector, only connect it to the power outlet if the values match.
Qualified personnel should regularly clean and service the equipment to prevent damage and overheating.

General Information:

The Audibax DSP8 / DSP10 / DSP12 / DSP15 has been developed and designed with attention to detail and quality control.
The product is built to last long and is made with long-lasting materials.
Please read the manual carefully to use the Audibax product properly.
Visit the website www.audibax.com for further information.

Symbols:

If the product contains the “CAUTION” symbol, disconnect all power sources before servicing.
To reduce the risk of electric shock, do not remove the cover or back of the product. Maintenance and repairs should be carried out by qualified service personnel. Note: For detailed instructions on adjusting brightness, contrast, reset, and exit functions, please refer to the complete user manual available on the website www.audibax.com.

DATA SHEET

Brand:	Audibax	Audibax
Product Name:	DSP8	DSP10
ID:	10242049	10242050
EAN:	7427244399753	7427244399760
Category:	Audio Active Speakers	Audio Active Speakers
DSP control:	Yes	Yes
Design:	Standard / Floor monitor / wall monitor / Live / Vocal boost

Standard / Floor monitor / wall monitor / Live / Vocal boost
Woofers:| 8″| 10″
Number of Woofers:| 1| 1
Number of ways:| 2| 2
RMS power:| 150W| 180W
Peak Power:| 450W| 450W
Impedance:| 8 ohms| 8 ohms
Monitor Slope:| Yes| Yes
Number of simultaneous entries:| 1| 1
Bluetooth:| Yes| Yes
Color:| Black| Black
Height:| 42.5 cm| 51 cm
Width:| 25.5 cm| 30 cm
Depth:| 25 cm| 29 cm
Weight:| 8 Kg| 10 Kg
Brand:| Audibax| Audibax
---|---|---
Product Name:| DSP12| DSP15
ID:| 10198308| 10198306
EAN:| 7427244396721| 7427244396714
Category:| Audio Active Speakers| Audio Active Speakers
DSP control:| Yes| Yes
Woofers:| 12″| 15″
Number of Woofers:| 1| 1
Number of ways:| 2| 2
RMS power:| 200W| 300W
Peak Power:| 1200W| 1500W
Monitor Slope:| Yes| Yes
Number of simultaneous entries:| 2| 2
Bluetooth:| Yes| Yes
Color:| Black| Black
Height:| 61 cm| 68 cm
Width:| 35 cm| 42 cm
Depth:| 34,8 cm| 38 cm
Weight:| 15,75 Kg| 20,65 Kg

WELCOME TO AUDIBAX
Thank you very much for choosing Audibax. We hope you enjoy your new product. It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality. We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result. Please read carefully this manual in order to use your Audibax product in the best way. Do not hesitate to visit our website for further information: www.audibax.com

SAFETY INSTRUCTIONS

GENERAL INFORMATION

It is important to read and follow the instructions carefully.
Keep all information and instructions in a secure location.
Always follow the instructions provided.
Take note of all safety warnings and never remove them from the equipment.
Use the equipment only as intended and for its intended purpose.
Ensure that the stands and/or mounts used are sufﬁciently stable and compatible for ﬁxed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
When installing the equipment, be sure to observe the relevant safety regulations in your country.
Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufﬁciently and cannot overheat.
Do not place sources of ignition, such as burning candles, on the equipment.
Keep ventilation slits unobstructed.
For equipment designed for indoor use only should not be used near water, ﬂammable materials, ﬂuids, or gases. Special outdoor equipment should be used in accordance with the manufacturer’s instructions.
Ensure that no dripping or splashed water can enter the equipment and do not place containers ﬁlled with liquids on the equipment.
Prevent objects from falling into the equipment.
Use the equipment only with recommended accessories intended by the manufacturer.
Do not attempt to open or modify the equipment.
Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
During transport, take steps to prevent the equipment from falling and causing damage or injury.
If the equipment is not functioning properly, ﬂuids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualiﬁed personnel should repair the equipment.
Clean the equipment with a dry cloth.
Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY

ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the speciﬁcations of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not ﬁt your outlet, contact an electrician.
Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
Avoid frequently turning the equipment on and off, as this can reduce its useful life.
IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.
To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.
Only install the equipment when it is disconnected from the power source.
To prevent damage and overheating, qualiﬁed personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog. If the product contains the following symbols, please, read carefully:

CAUTION
Risk of Electric Shock. Disconnect all power sources before servicing

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualiﬁed service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This equipment is designed for professional purposes and its commercial use must comply with the applicable national rules and regulations for accident prevention. As the manufacturer of this product, Audibax has the responsibility to inform you about the potential health risks associated with its use. One such risk is hearing damage caused by prolonged exposure to high volume. When this product is in use, it can generate high sound-pressure levels that may cause irreversible hearing damage to performers, employees, and audience members. To prevent this, it is important to avoid exposing yourself or others to volumes exceeding 90 dB for an extended period of time.

PACKAGE CONTENT

1 x DSP8 / DSP10 / DSP12 / DSP15
1 x User manual
1 x Power cord
1 x Signal line

PRODUCT DESCRIPTION

Model:	DSP8	DSP10	DSP12	DSP15
Type:	2 way active
speakers box	2 way active
speakers box	2 way active
speakers	2 way active

FACILITIES

CH1 Microphone or Line in
Balanced microphone input (combo 6.35mm jack/XLR). You may also use a microphone cable with unbalanced 6.35mm jack.
Level
This knob adjusts channel level, turn it to the right to raise the level, to the left to decrease it.
Ch1/ 2 MIC/ Line input switch
Place the switch in LINE to use a line-level source or MIC for use with a microphone.
Aux input
Jack 3.5mm inputs use with MP3 Player CD or any consumer type electronic.
Level: Controls how loud the AUX In’ input sounds.
Line Out
This XLR M output provides a balanced line-level signal, useful for connection to another active speaker.
Power Switch
This switches the product on /off.
Power Inlet and Power Fuse
Connect the mains supply here. Ensure the local mains supply is compatible with this product.
Voltage Selector
Use it to select the correct input voltage.
Bluetooth Switch
Press this button to sync your Bluetooth device with your speaker, at the end of the operation the LED will be steadily lit.
Note: long press turn on TWS:
To activate the TWS function set the two speakers (must is same model.) in bluetooth mode. On one of the two speakers press and hold this button. The blue LED will light up. TWS function connect.
Now you can connect your play device (smartphone ,tablet etc….) to the speaker in order to obtain a stereo effect. The TWS function works only bluetooth system.
DSP Functions
By pressing the button (10) you can access a series of settings that can be modified at will to optimize the reproduced sound. Turn the knob (10) to select the desired item, press and rotate it to change the related settings. Press it again to confirm and go back to the main menu. If you make no change, after a few seconds the main menu will appear again automatically on the display Below are the settings that can be modified: Please refer to DSP 12 of DSP function setting

NOTE: The rotating GAIN controls (2) allow you to set the gain for the input signals on the related sockets.
Make sure they are set correctly to avoid distortions or dangerous signal peaks that could damage the speaker. We suggest not to exceed the level indicated as CLIP.

BALANCED XLR

AUDIBAX- DSP8- Professional -Active- Speaker -with -DSP- Altavoz -
02

SPECS

Power supply: AC220V 50Hz
Maximum power consumption: 320Wh
Power consumption in standby mode: 45Wh
Output power: 400W R.M.S

BLUETOOTH
Bluetooth mode: Turn on the Bluetooth function on your phone. Search your device for the unit named “Audibax DSP” to connect, after successful pairing, you can play the music from the speaker. This device will be saved and it will not be necessary to identify it later to reconnect.

DSP FUNCTIONS

Audibax DSP system adjustment and control knob 3-Step control potentiometer:

Rotation to the left (decreasing menu selection or reduction of values)
Rotation to the right (increasing menu selection or increasing values)
Press (menu selection, program selection, menu exit)

Before Switching On
Pay attention to the position of the switch (MIC/Line ﬁg. 4) it is recommended to operate in Line position if there is no microphone connected to said (line 1 or line 2), turn the two gain controllers to the left. Power on, the welcome message will be displayed for a few seconds (initializing) The display will show the initial power-on screen.

MASTER VOLUME
The start value is +00. Rotate DSP controller to adjust the level (-60 to +10).

GAIN ADJUSTMENT
Adjust the gain of the Line 1 and Line 2 controllers (ﬁg. 8). If the display shows CLIP, lower the level.

DSP MENU
Press the DSP controller, to enter the setting menu, “after not operating the DSP controller for 10 seconds, the DSP menu will return to the home screen”.

MODE
Working modes, you can select between 4 modes:

Music: When you require the full range of frequencies for music reproduction.
DJ / Club: for events where you need an accentuation in low frequencies.
Live: for outdoor events or musical events.
Speech: for narrative conference events and conferences where voice prevails.

LCD DIM
Display dim function on / off button.

BRIGHT
Adjust screen brightness. CONTRAST Adjust screen contrast.

RESET
Return to factory functions

INFO
Displays the DSP version.

EXIT
Returns to the home screen.

DISPOSAL

Packaging:

The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
Please follow the laws and regulations regarding disposal and recycling of packaging in your country.

Device:

This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
Please follow all the disposal laws and regulations in your country.
As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.